HK 330I

HK 330I

Stereo Receiver (20 watts x 2)

Sold from 1982 until 1985

Predecessor Product: HK 350I
Successor Product: HK 385I
Made in: Japan

Documents & Downloads

Product Specifications

MSRP U.S.
$249.95 each
Dimensions (H x W x D)
4 x 17-3/8 x 14-1/2
Usable Sensitivity
FM MONO – 2.5uV
Quieting Sensitivity
MONO -4.0uV
Quieting Sensitivity
STEREO – 45uV
Signal-to-Noise Ratio
FM STEREO – -72dB
Capture Ratio
FM... 1.9dB
Alternate Channel Selectivity
AM... 40dB
Alternate Channel Selectivity
FM… 60dB
IF Rejection
85dB AM – 25dB
AM Rejection
FM... 50dB
Stereo Separation
45dB, 1kHz
Total Harmonic Distortion
FM MONO – 0.1%, 1kHz, 100% modulation
Total Harmonic Distortion
FM STEREO – 0.12% 1kHz, 100% modulation
Sensitivity
AM... AM – 300uV/m
Selectivity
AM – 35dB
Image Rejection
AM – 45dB
Amplifier Power (RMS)
20 watts per channel @ <0.09% THD primarily low order harmonics (@ 8 ohms from 20Hz – 20kHz)
Power Bandwidth
<10Hz – 60kHz @ half rated output with 8 ohms
Frequency Response
<4Hz – 150kHz (+0/–3dB @ rated output)
Total Harmonic Distortion
0.05% primarily low order harmonics (1kHz @ rated output)
Transient Intermodulation Distortion (TIM)
0.20% @ rated output
High Instantaneous Current Capability (HCC)
± 10 Amps
Slew Rate
60 volts/uSec
Rise Time
SQUARE WAVE – 2.5uSec @ 20kHz
Square Wave Tilt
8% @ 20kHz
Negative Feedback
22dB
Damping Factor
60 (at 8 ohms, 20Hz – 20kHz)
Hum and Noise
PHONO – -80dB A-WTD
Hum and Noise
AUX --85dB A-WTD
Input Sensitivity
PHONO -2.2mV
Input Sensitivity
AUX -135mV
Input Level/Impedance
PHONO – 125pF/47k ohms
Phono Overload
>130mV
RIAA Equalization
±1dB

Stereo Receiver (20 watts x 2)

Can’t find what you’re looking for?

Call us

Call us

To speak to our customer service specialist

1800-102-0525

Mon to Sun 10 AM to 7 PM IST

message

WhatsApp Us

Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446 

Mon - Sun: 10:00 am - 7:00 pm (IST)