Documents & Downloads
Product Specifications
- Power Requirements
- AC 120V/60Hz
- Power Consumption:
- Digital Inputs (coaxial/optical)
- 2/2 on Rear; 1/1 on front
- Standby:
- 8.9W
- Analog Inputs
- 1 A/V on front panel (switchable to output)
- Analog Inputs
- 2 audio-only
- Analog Inputs
- 5 A/V on rear panel
- Analog Inputs
- 6-/8-channel input
- Analog Inputs
- tuner
- Idle:
- 52W
- Max (7 channels driven):
- 760W
- On-Screen Display
- Yes
- Multizone Capability
- Audio; A-BUS Ready; RS-232 serial control port; surround back channels assignable to remote zone; Zone II remote
- Auto Setup
- EzSet remote
- Remote Control
- Backlit, eight-device, programmable learning remote(2-line LCD display)
- Shipping Weight (System, Accessories, Packing)
- 26.4 lb (12 kg)
- MSRP U.S.
- $1499.95 each
- # of Amplifier Channels
- 7
- Continuous Average Power (FTC) per Channel (stereo mode)
- 70 Watts per channel, 20Hz – 20kHz, @ <0.15% THD, both channels driven into 8 ohms
- Front L & R Channels
- 70 Watts per channel @ <0.15% THD, 20Hz – 20kHz into 8 ohms
- Center Channel
- 70 Watts @ <0.15% THD, 20Hz – 20kHz into 8 ohms
- Surround Channels (L & R Side, L & R Back)
- 70 Watts per channel @ <0.15% THD, 20Hz – 20kHz into 8 ohms
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 97dB (IHF-A)
- Surround System Adjacent Channel Separation:
- Dolby Pro Logic I/II/IIx
- 40dB
- Dolby Digital
- 55dB
- DTS
- 55dB
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
- Width
- 17.3 inches (440mm)
- Height
- 4.5 inches (114mm)
- Depth
- 18.8 inches (476mm)
- Weight
- 23.1 lb (10.5kg)
- Dimensions:
- Carton Dimensions
- 22.6 inches x 8.9 inches x 21.9 inches (573mm x 225mm x 555mm)
- Television Format
- NTSC
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response:
- Composite and S-Video
- 10Hz – 8MHz (–3dB)
- Component Video
- 10Hz – 50MHz (–3dB)
- Frequency Range
- AM... 520 – 1720kHz
- Frequency Range
- FM... 87.5 – 108.0MHz
- Signal-to-Noise Ratio
- AM... 45dB
- Usable Sensitivity
- FM... IHF 1.3µV/13.2dBf
- Signal-to-Noise Ratio
- FM... 70/68 dBA (Mono/Stereo)
- Usable Sensitivity
- AM... Loop 500µV
- Distortion
- AM... 1kHz, 50% Mod 0.8%
- Distortion (Mono/Stereo)
- FM... 0.2/0.3%
- Selectivity
- AM... ± 10kHz, 30dB
- Stereo Separation
- FM... 40dB @ 1kHz
- Selectivity
- FM... ± 400kHz, 70dB
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 90dB
- Amplifier Power (RMS)
- 70 x 7 @ 8 ohms (20Hz – 20kHz, <0.15% THD) (all channels driven at full power)
Digitally delightful. If you've always wanted a feature-packed audio/video receiver, but never thought one could fit in a small space, the DPR 1005 is a digital dream come true. Thanks to our digital path technology, you have access to a wide range of inputs and processing modes to power your system without missing a beat. Along with assignable, HD-compatible component video inputs, renameable audio inputs, and a full palette of surround sound modes and control options, the DPR 1005 excels at doing what you demand from your audio products - reproducing the original performance or movie soundtrack as it was meant to be heard!
FAQs & How-Tos
-
This receiver has a feature called "A/V Sync Delay" that allows you to manually set dissimilar video and audio synchronization that may occur with certain types of Plasma and HDTV's. The instruction for this setting can be found in your owner's manual in the section "Delay Adjustments" or "Delay Settings".Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Talk to a product expert
Call us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)