AVR 8000

AVR 8000

Audio/Video Receiver With Dolby Digital & DTS (125 watts x 2 | 110 watts x 5) THX Ultra Certified

Sold from 2001 until 2003

Predecessor Product: AVR 7000
Successor Product: AVR 7200
Made in: China

Documents & Downloads

Product Specifications

Power Requirements
120V/60Hz
Power Consumption
119W idle 694W maximum (2 channels driven)
MSRP U.S.
$2799.95 each
Continuous Average Power (FTC) per Channel (stereo mode)
125 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven
Surround System Adjacent Channel Separation:
Pro Logic Decoding
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Front L & R Channels
110 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven
Center Channel
110 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven
Surround Channels
110 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Weight
53 lb (24kg)
Dimensions (H x W x D)
7-5/8 inch x 17-5/16 inch x 20-1/2 inch (194mm x 440mm x 521mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 30MHz (–3dB)
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Frequency Range
AM... 520–1710kHz
Frequency Range
FM... 87.5–108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... 70/68 dBA (Mono/Stereo)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod. 0.8%
Distortion (Mono/Stereo)
FM... 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
FM Adjacent Channel Selectivity
FM... #ERROR!
High Instantaneous Current Capability (HCC)
± 85 Amps

See and hear it all, the way it was meant to be seen and heard! The AVR 8000 turns any input source, from the latest Dolby Digital Surround EX; soundtrack to a vintage two-channel recording, into a stunning entertainment experience. Dual 24-bit, twin-core Cirrus processors are combined with 192kHz/24-bit audiophile-grade digital-to-analog converters to extract a clarity that less advanced circuitry can't handle, while a high-current, ultrawide-bandwidth amplifier delivers the power. Sophisticated installations will benefit from three wide-bandwidth component video inputs, our exclusive front-panel digital inputs and outputs, and a multizone system complete with video and audio outputs, while everyone will enjoy the precision sound imaging made possible by the combination of THX Ultra processing and DTS or Logic 7 decoding.

FAQs & How-Tos

1 results
  • The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)