AVR 510

AVR 510

Audio/Video Receiver With Dolby Digital & DTS (80 watts x 2 | 70 watts x 5)

Sold from 2000 until 2001

Predecessor Product: AVR 500
Successor Product: AVR 520
Made in: Hong Kong

Documents & Downloads

Product Specifications

Power Requirements
AC 120V/60Hz
Power Consumption
78 Watts idle, 694 Watts maximum (2 channels driven)
MSRP U.S.
$999.95 each
Continuous Average Power (FTC) per Channel (stereo mode)
80 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
70 Watts per channel @ < 0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
70 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
70 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Analog Source Decoding
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
High Instantaneous Current Capability (HCC)
± 45 Amps
Transient Intermodulation Distortion (TIM)
Unmeasurable
Rise Time
16 µsec
Slew Rate
40V/µsec
Surround Modes
Dolby Digital, DTS surround, Harman's Logic 7, VMAx & EzSet
Digital Inputs (coaxial/optical)
6
Digital Output
2
Width
17.3 inch (440mm)
Height
6.5 inch (165mm)
Depth
17.1 inch (435mm)
Weight
35 lb (15.9kg)
Dimensions (H x W x D)
6.5 inch x 17.3 inch x 17.1 inch (165mm x 440mm x 435mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz (-3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3 µV/13.2dBf
Signal-to-Noise Ratio
FM... 70/68 dBA (Mono/Stereo)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion (Mono/Stereo)
FM... 0.2%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV

The AVR 510 delivers the performance you expect from Harman Kardon without sacrificing ease of use. The patented EzSet; remote control takes the guesswork out of speaker setup, and sophisticated surround processing technologies deliver a variety of listening options. 192kHz/24-bit DACs insure compatibility with the latest program sources, while front-panel digital inputs, one of which can be switched to an output, deliver maximum flexibility. Component video, S-Video and multiroom/multisource connections make the AVR 510 one of the most versatile models ever offered by Harman Kardon.

FAQs & How-Tos

1 results
  • The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call Us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with Us

Chat with Us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)