AVR 15

AVR 15

Audio/Video Receiver With Dolby Pro-Logic (25 watts x 3 front & 10 watts rear)

Sold from 1993 until 1995

Successor Product: AVR 10
Made in: Japan

Documents & Downloads

Product Specifications

MSRP U.S.
$699.95 each
Usable Sensitivity
FM... MONO – 11.7dB
Quieting Sensitivity
FM... STEREO – 37.2dB
Signal-to-Noise Ratio
FM... MONO – 78dB
Signal-to-Noise Ratio
FM... STEREO – 70dB
Capture Ratio
FM... 1.5dB
Alternate Channel Selectivity
FM... 75dB
Selectivity
FM... ADJACENT CHANNEL – 5dB
IF Rejection
FM... 80dB
AM Rejection
FM... 55dB
Stereo Separation
FM... 45dB
Total Harmonic Distortion
FM... MONO – @ 1kHz 0.1%
Total Harmonic Distortion
FM... STEREO – @ 1kHz 0.15%
Sensitivity
AM... EXTERNAL ANTENNA – 25 microvolts
Alternate Channel Selectivity
AM... 55dB
Image Rejection
AM... 40dB
IF Rejection
AM... 60dB
Audio Inputs
2
Audio/Video Inputs
1
Audio/Video Loops
2 (can also be used for tape loops)
Video Outputs
1
Amplifier Power (RMS)
CENTER 25 watts @ 8 ohms
Amplifier Power (RMS)
STEREO – FRONT 25 watts per channel @ 8 ohms
Total Harmonic Distortion
FRONT – @ 8 ohms 0.09%
Total Harmonic Distortion
FRONT – @ 4 ohms 0.3%
Total Harmonic Distortion
CENTER – @ 8 ohms 0.09%
Total Harmonic Distortion
REAR – @ 4 ohms 0.3%
Output 4 Ohms
SURROUND – FRONT 35 watts per channel
Output 4 Ohms
REAR 10 watts per channel
High Instantaneous Current Capability (HCC)
± 25 Amps
Negative Feedback
26dB
Frequency Response
0.5Hz – 150kHz (±3dB)
Slew Rate
80 v/microseconds
Rise Time
1.8 microseconds
Transient Intermodulation Distortion (TIM)
Unmeasurable
Damping Factor
45
Signal-to-Noise Ratio
98dB
Input Level/Impedance
135mv/22k ohms
Tone Controls
BASS – ±10dB @ 50Hz
Tone Controls
TREBLE – ±10dB @ 10kHz
Loudness Control
+10dB @ 50Hz

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)