HK 3385

HK 3385

Stereo Receiver (80 watts x 2)

Sold from 2007 until 2007

Predecessor Product: HK 3380
Successor Product: HK 3390
Made in: China

Documents & Downloads

Product Specifications

Power Requirements
AC 120V/60Hz
Power Consumption
3W standby, 200W maximum (both channels driven)
Digital Inputs (coaxial/optical)
None
Analog Inputs
1 A/V on front panel
Analog Inputs
3 A/V on rear panel
Analog Inputs
3 audio-only
Analog Inputs
tuner
On-Screen Display
No
Multizone Capability
Speaker A/B switch
Remote Control
Five-device system remote
Shipping Weight (System, Accessories, Packing)
25.1 lb (11.41kg)
MSRP U.S.
$349.95 each
# of Amplifier Channels
2
Stereo Mode:
Continuous Average Power (FTC) per Channel
80 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms 100 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Frequency Response
10Hz – 110kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Rise Time
16 µsec
Slew Rate
40V/µsec
Width
17.4 inches (442mm)
Height
6.6 inches (168mm)
Depth
15 inches (382mm)
Weight
20.9 lb (9.48kg)
Dimensions:
Carton Dimensions
21.5 inches x 9.9 inches x 17.9 inches (545mm x 251mm x 455mm)
Television Format
NTSC/PAL/SECAM
Signal Format System
Composite
Input Level/Impedance
1V p-p/75 ohms, unbalanced
Sync Polarity
Negative
Output Level/Impedance
1V/75 ohms, unbalanced
Video Frequency Response
10Hz – 10MHz
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... >40dB
Usable Sensitivity
FM... IHF 1.12µV/13.5dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 73/72dB
Usable Sensitivity
AM... Loop 500µV/M
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.3/0.4%
Selectivity
AM... ± 10kHz, >25dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... >80dB
IF Rejection
FM... >100dB
Tuner Output Level
FM... 1kHz, ±100kHz, Dev 500mV
Amplifier Power (RMS)
80 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 42 Amps

The perfect match for a main music system, your office or that special place for relaxation, the HK 3385 is music at its best. It uses the same high-current, ultrawide-bandwidth amplifier design found in our AVR Series receivers, and has four video inputs, a phono input and a cable for direct audio/video connection to an iPod or MP3 player, all controlled by a multicomponent remote. Let the HK 3385 make beautiful music for you.

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: (800) 422-8027

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)

Chat with us

Chat with us

Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)