Adapt + Amp
Wireless HD Amplifier
Getting started with your Adapt + Amp
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Rated power
- 2 x 60W at 8Ω
- Frequency response
- 20Hz ~ 20kHz
- Signal-to-noise ratio
- >80dB
- Input connections
- Bluetooth, Aux-in, Optical, Wi-Fi, Ethernet
- Dimensions (W x D x H)
- 210mm x 190mm x 61mm
- Weight
- 1288g
- Power supply
- 100-240V~50/60Hz
- Power consumption in sleep mode
- <3.0 Watts
- Bluetooth version
- 4.1
- Bluetooth transmitter frequency range
- 2402 – 2480MHz
- Bluetooth transmitter power
- 9dBm
- Bluetooth transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- 2.4G Wi-Fi transmitter frequency range
- 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
- 2.4G Wi-Fi transmitter power
- <20dBm (EIRP)
- 2.4G Wi-Fi modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 2.4G Wi-Fi network compatibility
- IEEE 802.11b/g/n
- 5G Wi-Fi transmitter power
- <20dBm
- 5G Wi-Fi modulation
- OFDM, QPSK, 16-QAM, 64-QAM, 256-QAM
- 5G Wi-Fi network compatibility
- IEEE 802.11 n,ac
- 5G Wi-Fi transmitter frequency range
- 5.15 - 5.35GHz, 5.470 - 5.725GHz, 5.725 - 5.825GHz
- Note
- The ADAPT+AMP is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi must remain active at all times to ensure proper operation. The ADAPT+AMP is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
Turns your passive loudspeakers into a wireless music streaming system
The Harman Kardon Omni Adapt+Amp is a wireless, HD music amplifier with 2 x 60 watts of stereo amplification. It upgrades your existing stereo loudspeakers to become a wireless HD music system. It also adds access to music services such as Spotify Connect and Chromecast built-in. Simple to set up and easy to operate, the Adapt+Amp is the fastest way to play your music wireless anywhere in your home with one speaker or many!
Seamlessly stream your favorite music all over your home and to any Harman Kardon Omni+ wireless HD products. Listen to different music in any room of your home.
Stream your favorite songs and playlists wirelessly around your home with Spotify Connect, using the Spotify app as a remote. Spotify Connect feature requires Spotify Premium subscription.
With Chromecast built-in, you can cast your favorite music, radio stations and podcasts from your mobile device to your speakers. Chromecast built-in may require subscription(s).
The Harman Kardon Omni Adapt+Amp supports 24bit / 192kHz HD audio streaming. Enjoy a superior audio experience, with higher audio quality than from a CD. Connect your passive loudspeakers, active subwoofer, as well as any analog or digital audio sources.
This compact yet powerful amplifier is designed with the ability to stack up to five units, so you’ll enjoy greater flexibility during installation.
Class D digital amplifiers with high current capability to power your existing loudspeakers.
Walk from one room to another and your favorite music will follow at the touch of a button. Simply press the Link button to start the music – no need to find your phone, just press the button.
Supports the latest 802.11AC wireless home networking technology and dual band (both 2.4GHz and 5GHz) Wi-Fi connection, resulting in a faster, robust and more stable wireless connection.
Easily set up your system and control it with the Harman Kardon Controller app. With additional support for WAC on Apple devices and a step by step in-app guide you can quickly start streaming your music.
FAQs & How-Tos
5 results
-
Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.Was this helpful? Thank you for your feedback!
-
There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call Us now at:
(800) 422-8027
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat with Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)