JBL Omni Bar Plus
Wireless HD Soundbar
Getting started with your JBL Omni Bar Plus
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Soundbar amplifier power
- 30W x 4
- Power consumption in sleep mode
- <3 Watts
- Note
- The OMNI BAR+ is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice, therefore, the Bluetooth and Wi-Fi must remain active at all times to ensure proper operation. The OMNI BAR+ is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
- Soundbar
- 4 x 60mm (2.25”) woofers, 2 x 20mm (0.75”) tweeters
- Subwoofer
- 1 x 166mm (6.5”)
- One HDMi® output with Audio Return Channel (ARC) and CEC support
- Bluetooth® connectivity
- Google Cast for audio
- Spotify Connect
- One stereo analog-audio input
- One optical digital input
- WIFI connectivity with DLNA 1.5 support
- One USB port for software update only
- Remote control that conveniently allows you to control all Omni Bar functionality
Enjoy your favorite movie and music with wireless, room-filling sound.
The Harman Kardon Omni Bar+ needs just one cable to connect to your HD TV and lets you easily set up a wireless HD music system in your home. It also adds access to music streaming services such as Spotify Connect and Chromecast built-in. With Dolby Digital and the included Sub Woofer you can have new home theater and because it can connect to any Harman Kardon Omni+ speakers, you can easily set up a whole home wireless music system.
The Omni Bar+ and subwoofer give you an unmatched home theater listening experience with just a single HDMI cable connection.
Seamlessly stream your favorite music to any Harman Kardon Omni+ wireless products. Listen to different music in any room in your home.
The Harman Kardon Omni Bar + supports full 5.1 discrete surround sound. So you can wirelessly set up a multi-channel home theater with no cables required.
Stream your favorite songs and playlists wirelessly around your home with Spotify Connect, using the Spotify app as a remote. Spotify Connect feature requires Spotify Premium subscription.
With Chromecast built-in, you can cast your
favorite music, radio stations and podcasts from your mobile device to your speakers. Chromecast built-in may require subscription(s).
The Harman Kardon Omni Bar+ supports 24bit / 192kHz HD audio streaming. Enjoy a superior audio experience, with higher audio quality than from a CD.
Easily set up your system and control it with the Harman Kardon Controller app. With additional support for WAS on Apple devices and a step by step in-app guide you can quickly start playing music.
Supports the latest 802.11AC wireless home networking technology and dual band (both 2.4GHz and 5GHz) Wi-Fi connection, resulting in a faster, robust and more stable wireless connection.
Connect any device via Bluetooth, Optical, HDMI or aux input to your Omni Bar+ and it will automatically steam your music to any other Harman Kardon Omni+ speakers in your home wirelessly.
FAQs & How-Tos
18 results
-
No, since the OMNI BAR+ does not have any HDMI input connections, it is only your source, connected to the TV, (and of course your TV) that need to be 4K compatible.Was this helpful? Thank you for your feedback!
-
Yes, press and hold the Surround button on the OMNI BAR+ until it starts to blink amber. You are now in pairing mode. Press Volume+ on your OMNI BAR+, then press Volume+ on your remote control. The surround button will quickly flash white, to indicate it has learned Volume+. Repeat for Volume-, and Mute, and then hold down the Surround button to exit remote control learning.Was this helpful? Thank you for your feedback!
-
There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.Was this helpful? Thank you for your feedback!
-
On the back of your OMNI BAR+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.Was this helpful? Thank you for your feedback!
-
Please make sure that your smart-device that is using the HK Controller app and OMNI speaker(s), are connected to the same band (2.4G or 5G) when using a Dual-band router.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
The OMNI BAR+ as standalone system is 2.1, however when using it in a 5.1 wireless surround system, it generates a virtual acoustic center speaker to complete the 5.1 Surround system. In that combination it will be a 3.1 system.Was this helpful? Thank you for your feedback!
-
One explanation can be that your OMNI 50+ is part of a 5.1 system with your Omni Bar, which will make the surround OMNI 50+ left and right rear speakers act as "secondary", and Bluetooth connection is not possible to secondary speakers. To use the OMNI 50+ as a portable speaker again, simply perform a reset of the speaker by pressing the reset button for 5 seconds. Please note that after resetting your OMNI 50+, it is no longer part of the 5.1 wireless system.Was this helpful? Thank you for your feedback!
-
Do not worry, pairing both devices is easy and quick. Press the "pairing" button on the back of the Omni Bar, then press "pairing" button on the subwoofer. They will start communicating with each other, and when both devices show white light in the LED on the back, that indicates that they are paired.Was this helpful? Thank you for your feedback!
-
No, that is not possible. However, you can create a 5.1 wireless surround system to extend your TV or movie sound. All you need is two additional OMNI+ speakers, such as 2 x OMNI 10+, OMNI 20+ or OMNI 50+.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday – Friday: 08.00-17.00
Saturday – Sunday : 09.00–15.00
WhatsApp Us
Send us a message on +44 161 222 3325 or click here
Monday - Friday: 08.00-17.00Saturday - Sunday: 09:00-15:00