Onyx Studio 2

Specifications

Specifikationer

Power Requirement: 100 – 240V AC, 50/60Hz

Power Consumption: 38W maximum less than 1W standby

Maximum SPL: 95dB @ 1m

Bi-amplification: 4 x 15W

Power adaptor: 19V, 2.0A

Built-in battery: 3.7V, 2600mAh, Cylindrical Lithium Ion Rechargeable Battery

Battery charge time: 5 hours

Speaker Impedance: 4 ohm per speaker

Frequency range: 2402MHz – 2480MHz

Transmitter power: less than 4dBm

Modulation: GFSK/π/4-DQPSK / 8DPSK

Wireless: Bluetooth 3.0 A2DP v1.3 AVRCP v1.5

Mål

Dimensions (Dia x W x H): 280mm x 161mm x 260mm

A beautiful and powerful audio performance

Harman Kardon Onyx Studio 2 giver dig klassens bedste lyd i et ikonisk design, der pynter i ethvert lokale. Med den bekvemme trådløse Bluetooth-forbindelse og det genopladelige Li-ionbatteri kan du nyde musikken uden kabler i op til 5 timer – hvor som helst. Harman Kardon Onyx Studio 2 er udstyret med nye funktioner som indbygget højttalertelefon med Harmans VoiceLogic-teknik til ekko- og støjreduktion samt en AUX-indgang. Onyx Studio2 er udført i de fineste materialer og er udviklet til at overgå dine forventninger med Harman Kardons lyd på første klasse.

Trådløs Bluetooth-forbindelse med social funktion

Når to enheder forbindes til højttaleren via Bluetooth, kan I skiftes til at levere musikken.

Indbygget genopladeligt batteri

Leverer op til 5 timers spilletid, så du kan nyde din musik overalt.

Indbygget højttalertelefon

Giver dig håndfri mobilsamtaler i krystalklar kvalitet takket være Harmans VoiceLogic-teknik til ekko- og støjreduktion.

Eksklusivt Harman Kardon design

Harman Kardons prisvindende designsprog passer ind i ethvert hjem.

FAQs & How-Tos

7 results

Sort

Page size

Can i reset my ONYX STUDIO 2?

Yes, turn on your Onyx studio 2 and hold down phone button & volume + at the same time. Onyx Studio 2 will power off and when you power it on again, it has been reset.

Was this helpful? Thank you for your feedback!
Does my speaker have an input selector, or are Bluetooth and AUX signals playing simultaneously?

Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.

Was this helpful? Thank you for your feedback!
How can I see if the battery is charging, and when it is fully charged?

With the Onyx Studio 2 switched ON, the ON/OFF switch light flashes while the unit is charging. If the unit is switched OFF, no indication shows that charging is taking place, but charging still takes place. When charging is complete, the light becomes constant. There is no battery status indication, so it is not possible to follow the power level of the battery.

Was this helpful? Thank you for your feedback!
How to reset: Onyx Studio 2, 3 and 4?

Press and hold the Phone and VOL + button simultaneously.
After 5 seconds, the unit powers Off, and is now reset.

Was this helpful? Thank you for your feedback!
I have connected my Onyx Studio 2 to my PC/MAC, but no sound is coming out. Why is that?

To use the Onyx Studio 2 with a PC or MAC, please make sure that you have the correct Bluetooth driver, that supports A2DP Audio Codec.

Was this helpful? Thank you for your feedback!
my Onyx studio 2 will power off when I remove charging cable, is that normal?

Yes, it will power off after removing charging cable. It is by design.

Was this helpful? Thank you for your feedback!
Would it be possible to connect 2 x Onyx Studio 2 together?

No, it is not possible to link them together. They are standalone Bluetooth speakers.

Was this helpful? Thank you for your feedback!