Harman Kardon Onyx Studio 4
Bærbar Bluetooth-højttaler
Getting started with your Harman Kardon Onyx Studio 4
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Support
- A2DP 1.3, AVRCP 1.6, HFP 1.6
- Enheder
- Bashøjttaler 2 x 75 mm, diskanthøjttaler 2 x 20 mm
- Mærkeeffekt
- 4 x 15 W (vekselstrømstilstand); 4 x 7,5 W (batteritilstand)
- Frekvensområde
- 50 Hz - 20 kHz (-6 dB)
- Signal-støj-forhold
- 80 dB A-vægtet
- Vægt
- 2061 g
- Mål (H x B x D)
- 260 mm x 278 mm x 159,5 mm
- Bluetooth-version
- 4.2
- Bluetooth-sendereffekt
- 0 - 9 dBm
- Frekvensområde for Bluetooth-sender
- 2402 MHz - 2480 MHz
- Bluetooth-sendermodulation
- GFSK, π/4-DQPSK, 8-DPSK
- Strømforsyning
- 19 V/2 A
- Batteritype
- 3,7 V/3000 mAh lithiumion
- Batteriopladningstid
- 5 timer
- Musikspilletid
- op til 8 timer (afhænger af lydstyrke og indhold)
Elegant design med masser af funktioner og uovertruffen lyd
Med en perfekt balance mellem fremragende lyd, et ikonisk design og førsteklasses materialer er Onyx Studio 4 indbegrebet af lyd, der fylder hele rummet. Onyx Studio 4 er skabt til at være den bærbare Bluetooth-højttaler i sin klasse med den bedste lyd, komplet med alle funktioner. Den har to forbindelsesmuligheder, 8 timers spilletid og Harman Kardon Connect+, som gør det muligt at forbinde over 100 højttalere med den samme funktion med et tryk på en knap. Onyx Studio 4 kommer desuden med en indbygget mikrofon med Voicelogic, støj og ekkoreduktion, der gør det muligt at foretage krystalklare lydkonferencer via højttaleren.
Spil musik trådløst via Bluetooth for at nyde lyd, der fylder hele rummet. Forbind op til 2 smart-enheder på samme tid, og lad dem skiftes til at spille musik.
Det genopladelige batteri giver op til 8 timers spilletid.
Forstærk lydoplevelsen ved trådløst at forbinde mere end 100 HK Connect+ aktiverede højttalere.
Støj- og ekkoreduktion gør det muligt at foretage krystalklare lydkonferencer.
Få adgang til Siri eller Google Now fra højttaleren med et enkelt tryk på en knap. Dette konfigureres nemt via HK Connect-appen.
Kombinationen af enestående stof og finish, og det ikoniske design passer godt til enhver stil.
FAQs & How-Tos
7 results
-
If the buttons on your portable speaker are not working properly or are unresponsive while plugged into a power source, please try running the speaker on battery. If the buttons perform correctly while running on battery, this means your power supply is not providing enough current/amps. Be sure to use a power supply that has a rating equal to or greater than the amperage rating indicated in your product specs.Was this helpful? Thank you for your feedback!
-
Yes, you can take can incoming call from the Onyx 4 by pressing the call button located between the power button and volume + button.Was this helpful? Thank you for your feedback!
-
Bluetooth keeps on playing, even if you connect something and play to the AUX input. BT keeps on playing, since it has first priority. If you pause or stop BT play, any source playing to the AUX input will now be heard. If you resume play on the BT source, it will take over, and the AUX source is no longer heard, but will of course keep on playing, since there is no way to send a pause or stop signal to the AUX source via the line cable. All of this means that there is an input selector switch built into the device, controlled by the BT play function.Was this helpful? Thank you for your feedback!
-
Make sure that the unit you are attempting to connect to is in pairing mode under Bluetooth Settings. Press the power button located on far right outer rim of the speaker. If this is the first time connecting the unit, it will immediately go into pairing mode. HK Onyx 4 Studio should show up on your discoverable devices within 3-5 seconds. Once you choose the HK Onyx Studio 4 on your device, you will be connected and ready to experience that superior Harman Kardon sound.Was this helpful? Thank you for your feedback!
-
Download the HK Connect app to your mobile device. Make sure that the Onyx Studio 4 speaker is connected successfully to your mobile device. The HK Connect app should recognize the Onyx Studio 4 within the first few seconds. Once inside the app you can activate the voice assistant and connect to other Connect+ Harman Kardon devices.Was this helpful? Thank you for your feedback!
-
Press and hold the Phone and VOL + button simultaneously.
After 5 seconds, the unit powers Off, and is now reset.Was this helpful? Thank you for your feedback! -
JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the partyWas this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 11:00-16:00
