Aura Plus
Wireless Home Speaker System
Getting started with your Aura Plus
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Specifications
- Type
- Home audio system
- Frequency response
- 50Hz – 20kHz
- Maximum SPL
- 93dB
- Power output
- 2 x 15W + 1 x 30W
- Weight
- 2.45 Kg
- Dimensions (W x H)
- 21,5 x 27 cm
Behold. A bold new era of sound, function and design
The Harman Kardon Aura Plus Wireless Speaker System has a sound as rich and rewarding as its appearance suggests. With its 6 X 1.5” high- and mid-range drivers and a 4.5” subwoofer delivering Omni-directional, 360º sound, the Aura Plus packs a punch much larger than its modest footprint might suggest. Outfitted with premium materials and elite features – including built-in Bluetooth® to stream audio from your Bluetooth® devices, Wifi for Apple AirPlay, Spotify Connect and DLNA streaming on your home network – the Harman Kardon Aura Plus delivers a look and feel you’ll be proud to include in your home. From its premium cloth grill to its transparent enclosure – which lets you see inside to observe the subwoofer and its custom-built metal housing and illuminating LED – your own expectations will be forever altered. Use the Harman Kardon Remote app to guide you through a simplified set-up, giving you full control over your wireless Harman Kardon ecosystem. Aura Plus stands alone in a world of me-too speakers as it clearly demonstrated and shows that beauty can sound as stunning as it looks.
FAQs & How-Tos
-
Yes, when unit is on, press and hold Source and Power buttons for about 6-7 seconds.Was this helpful? Thank you for your feedback!
-
If you want to change Bluetooth source, you may have to reset the Bluetooth system in the AURA. To do this, hold your finger on the input selector field (circle with arrow pointing in) on the side of your AURA for at least 3 seconds. Now the previous source is deleted, and you can pair a new source and play from it.Was this helpful? Thank you for your feedback!
-
Yes, simply connect an AUX (phono) cable from TV to your AURA.Was this helpful? Thank you for your feedback!
-
Yes, no matter if Aura is in Sleep mode or Standby mode, an incoming Bluetooth signal will wake it up.Was this helpful? Thank you for your feedback!
-
We have some suggestions if you want to enjoy the best performance from your Bluetooth devices. 1. Please note that if you have a large number of Apps open in your smartphone or tablet, this may block or overtax its processor. Dropouts may result. Try to close all or most active apps. This should solve the problem. 2. Bluetooth signals from smartphones and tablets are not very strong. Make sure that the signal does not have to pass through doors, walls etc. Always maintain a clear line of sight between transmitter and receiver. 3. Do not carry your smartphone in your pocket, if you have dropouts. Your body can act as a screen, reducing the strength of the Bluetooth signal. Put the phone on a table or other surface. 4. Do not walk around while listening. If the transmitter and the receiver are moved in relation to each other, dropouts occur more frequently. 5. Under normal circumstances, you can expect a range of 5 meters with no problems, if you follow the above advice. In some instances range is longer, but we cannot promise this.Was this helpful? Thank you for your feedback!
-
Make sure your source device and AURA are on the same network. Then make sure your router is set to support older Wi-Fi protocols, such as b/g where the AURA is operating. Some routers have a function to disable older protocols and only use newer ones.Was this helpful? Thank you for your feedback!
-
AURA is DLNA compatible, which means that if you have a device capable of streaming DLNA content (AUDIO only), then it will be visible for these devices. If you do not see AURA on your network, please make sure you have connected it to the Wi-Fi and followed the procedure, as it requires to be connected via Wi-Fi.Was this helpful? Thank you for your feedback!
-
Yes, in the Harman Kardon Remote APP, it is possible to change the AURA's Bluetooth name.Was this helpful? Thank you for your feedback!
-
It is not possible to clean the clear dome of the AURA. The dome cannot be removed without damaging the product. The only solution if debris falls into the AURA is to try to shake it out through the bass tube. We cannot recommend using a vacuum cleaner to suck or blow through the bass tube.Was this helpful? Thank you for your feedback!
-
The Aura only goes from sleep mode to stand-by mode if you either press Power Off, or leave the Aura inactive for 30 minutes with no wifi connection established. Please note that the power light dims when Aura enters sleep mode, but extinguishes completely in stand-by mode. Please note that in both Sleep and Standby modes, Bluetooth remains active, and Aura will wake up if BT transmission is received.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 11:00-16:00
