Harman Kardon Citation Multibeam™ 1100
Førsteklasses soundbar med MultiBeam™ og Dolby Atmos®
Getting started with your Harman Kardon Citation Multibeam™ 1100
Documents & Downloads
Specifications
- Strømforsyning
- 100-240 V AC, ~ 50/60 Hz
- Netværkets strømforbrug ved standby
- < 2,0 W
- Driftstemperatur
- 0 °C-45 °C
- Samlet højttalerudgangseffekt (maks. ved THD (total harmonisk forvrængning) 1 %)
- 630W
- Soundbar-udgangseffekt (maks. ved THD (total harmonisk forvrængning) 1 %)
- 8 x 60 W bashøjttaler og fuldskala og 3 x 50 W diskantenhed
- Soundbar-transducer
- 6 x (55 x 90) mm racetrack-enheder, 3 x 1" (25 mm) diskantenheder, 2 x 2,75" (70 mm) opadrettede fuldtone-enheder
- Frekvenskarakteristik
- 52 Hz-20 KHz (-6 dB)
- Lydindgange
- 1 optisk, Bluetooth, Chromecast built-in, AirPlay, Alexa MRM
- Mål (B x H x D)
- 1150 x 65 x 130 mm
- Vægt
- 4,6 kg
- Pakkens mål
- (B x H x D)
- Pakkens vægt
- 7,20 kg
- USB-port
- Type A (Kun for service)
- USB-strømdata
- 5 V DC, 0,5 A
- Bluetooth-version
- 5
- Bluetooth-profil
- A2DP 1.2, AVRCP 1.5
- Frekvensområde for Bluetooth-sender
- 2400 MHz-2483,5 MHz
- Bluetooth-sendereffekt
- <13 dBm (EIRP)
- Wi-fi-netværk
- IEEE 802.11 a/b/g/n/ac (2,4 GHz/5 GHz)
- 2,4G wi-fi-senders frekvensområde
- 2412-2472 MHz (2,4 GHz ISM-bånd, USA 11 kanaler, Europa og andre steder 13 kanaler)
- 2,4G wi-fi-sendereffekt
- <19 dBm (EIRP)
- 5G wi-fi-senders frekvensområde
- 5,15-5,35 GHz, 5,470-5,725 GHz, 5,725-5,825 GHz
- 5G wi-fi-sendereffekt
- <20 dBm (EIRP)
- 5G WISA-senders frekvensområde
- 5,15-5,35 GHz, 5,470-5,725 GHz, 5,725-5,825 GHz
- 5G WISA-sendereffekt
- <14 dBm (EIRP)
- HDMI-videoindgang
- 1
- HDMI-videoudgang (med Enhanced Audio Return Channel, eARC)
- 1
- HDMI HDCP-version
- 2.3
- HDR
- HDR10, Dolby Vision
Bliv omgivet af smuk 3D-lyd.
Din musik. Dine film. Dine spil. Nu løftet op på et helt nyt niveau. Med MultiBeam™-teknologi og 11 dynamiske enheder, herunder to opadrettede højdekanaler til Dolby Atmos®, leverer Harman Kardon Citation MultiBeam 1100-soundbaren fyldig bas og omsluttende 3D-surroundlyd som i biografen. Det elegante design matcher den smukke lyd perfekt. Intuitive betjeningsknapper, HDMI eARC-tilslutning og automatisk rumkalibrering gør opsætningen problemfri. Nyd musik i HD-kvalitet fra over 300 streamingtjenester med AirPlay, Alexa Multi-Room Music* og Chromecast built-in™. Soundbaren er kompatibel med højttalere, der understøtter stemmeassistenter, så du kan styre din musik med din stemme. Harman Kardon Citation MultiBeam 1100. Det er ikke bare lyd. Det er en oplevelse.
FAQs & How-Tos
-
PureVoice is default ON when you turn on the soundbar. You may turn OFF PureVoice by using the LCD touch display. On the touchscreen, swipe to the Settings page, then tap Audio -> PureVoice to enable or disable PureVoice.
Was this helpful? Thank you for your feedback! -
The Checklist
Let us walk-through a list of things needed to ensure every requirement is met.
- Check your mobile device if that is able to connect to same Wireless network.
- Make sure you are within range of your Wireless router.
- Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
- Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
- You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
- You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
- Try using a different mobile device, if you have one.
- Reboot your Wireless network router and your mobile device.
Wireless Network Extender
Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.- Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
- Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
- Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
- To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
- In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).
One Wireless Network Name (SSID)
- You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
- If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
- To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Mandag - Fredag - 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 11:00-16:00