How To

Support Overview / How To

How To

442 results

Sort

Page size

How to set up your device to your Wi-Fi network

Download the Google Home app, available for iOS and Android versions. 1. Open the Google Home app. 2. Plug in power for your Enchant 800 or Enchant 1300 Soundbar. 3. Enable Bluetooth. 3.1. Enable Location service on your phone and permit Google Home app to view your location (Android only). 4. Click setup device in your Google Home app. 5. Follow the instructions provided in the app, and enjoy Chromecast streaming for your Enchant soundbar!

Was this helpful? Thank you for your feedback!
How to set up Airplay without Google Assistant
The Citation product with Airplay 2, use an iOS feature named Wireless Accessory Configuration (WAC), which is the easiest way to set up Wi-Fi for iPhone users. If you want to set up AirPlay with WAC and set up Google Assistant later, you can follow the below instructions.
1. Go into the Wi-Fi settings on the iPhone/iPad
2. Select the speaker you want to set up AirPlay under “SET UP NEW AIRPLAY SPEAKER...” on the lower part of the display.
3. Choose the Wi-Fi network you want to connect this speaker to, then press Next. This should normally be the same network your phone is connected to, which will appear as the default option.
4. The speaker will connect to the Wi-Fi network. Press Done to finish the setup.
5. After setup is successful. You can tap the Airplay symbol in Control Center or from your favorite audio streaming app to use AirPlay from your iPhone and iPad.
Note:
- If you don’t see the correct Wi-Fi network, make sure that the speaker is in range of the Wi-Fi router or access point.
- If your iPhone or iPad has never connected to this Wi-Fi network before, you will need to enter the Wi-Fi password at this time. Most users will not need to enter this password.
- If you cannot see your speaker under “SET UP NEW AIRPLAY SPEAKER...”, unplug and plug in power again to start it again.
- About streaming music from Apple TV, iTunes and Mac, you can visit https://support.apple.com/HT202809 for more information.
Was this helpful? Thank you for your feedback!
How to set it up to your Wireless network
What you need first
- A Harman/Kardon Enchant Soundbar (1300 or 800 model).
- Latest version of the Google Home app
- A mobile device or tablet with Android or iOS system.
- An internet connection.
- Dual-band router with 2.4GHz and 5GHz connection
Adding your Enchant soundbar to your Wi-Fi
1. Open the Google Home app
1. Click on "ADD" to connect your Enchant 800 or Enchant 1300 Soundbar to your Wi-Fi network.
2. Follow the instructions on screen and enjoy beautiful sound using Chromecast technology.
Was this helpful? Thank you for your feedback!
How to set alarm manually instead of voice command
Setting an alarm
- Press alarm button once - the screen displays "ADD"
- Press Snooze button
- Set alarm time hours (use up/down arrow buttons)
- Press Snooze button
- Set alarm time minutes (use up/down arrow buttons)
- Set alarm repeat mode: ONCE, WEEKDAYS, WEEKENDS or EVERYDAY (use up/down arrow buttons)
- Press Snooze button - the screen displays "DONE"
- Alarm is now set
Deleting an alarm
- Press alarm button repeatedly until the desired alarm is shown
- Press Snooze button - display shoes "Deleted"
Was this helpful? Thank you for your feedback!
How to restore your device back to Factory default settings

1. Power on the Enchant 800 or Enchant 1300 Soundbar. 2. In any source mode, press the power and source button for 5 seconds. 3. The Enchant 800 or Enchant 1300 will power off automatically and turn on again. 4. Your device is now reset back to default Factory settings. 5. You can now redo the setup through the Google Home app or pair with a new smartphone or tablet.

Was this helpful? Thank you for your feedback!
How to restore back to factory settings
Resetting the device
1. In any source mode, press and hold the power button and Source button for 5 seconds.
2. When the factory settings restore is complete, the soundbar automatically turns off and restarts.
3. You can now set it up via Google Home app again or connect any new Bluetooth devices.
Was this helpful? Thank you for your feedback!
How to reset your HK ADAPT+ device

On the bottom of your ADAPT+ there is a reset button. Hold it down for 5 seconds, until the round button LED lights up in white. The product is now reset and ready to be set up again.

Was this helpful? Thank you for your feedback!
How To Reset To Factory Settings
Resetting the SOUNDSTICKS 4 to Factory Settings
1. The unit must be on
2. Press and hold Power and Bluetooth buttons for > 10 seconds
3. The unit is reset
Was this helpful? Thank you for your feedback!
How to reset: Onyx Studio 5/6/7/8/9 & Aura Studio 4

Press and hold the 'Volume +' and 'Bluetooth' buttons simultaneously for > 2 seconds (> 5 seconds for the Onyx Studio 8, 9 & Aura Studio 4), until the speaker powers off.
The product is now reset to factory settings.

Was this helpful? Thank you for your feedback!
How to reset: Onyx Studio 2, 3 and 4?

Press and hold the Phone and VOL + button simultaneously.
After 5 seconds, the unit powers Off, and is now reset.

Was this helpful? Thank you for your feedback!
How to reset

Press and hold the Bluetooth & Volume+ buttons for > 5 seconds.

Was this helpful? Thank you for your feedback!
How to reset

Press and hold the Volume down and Voice assistant button simultaneously for more than 10 seconds. The speaker will play a sound to confirm.

Was this helpful? Thank you for your feedback!