How To

Support Overview / How To

How To

442 results

Sort

Page size

Why does the red LED blink when I power on my Onyx Studio 9 straight out of the box, and then shuts down shortly after?

You need to charge your Onyx Studio 9 using the power cord included in the package. It takes about 4 hours to fully charge.

Was this helpful? Thank you for your feedback!
Why doesn't the speaker play as loud on Battery mode versus when connected to AC Power?

This is by design to achieve maximum battery play time. To get Maximum loudness connect the unit to AC power during usage.

Was this helpful? Thank you for your feedback!
Why doesn't the AVR respond when I use the remote control, even though my other products work just fine?

The remote is only capable of operating one device at a time (unless you have programmed advanced functions such as Volume, Channel or Transport control Punch-Through). When you press the Source Selector to operate your other product, such as the DVD player, the remote cannot control any other product, including the AVR, until you press the AVR Button again. To avoid your problem in the future, always press the AVR Button or appropriate Source Selector before you enter any command.

Was this helpful? Thank you for your feedback!
Why did I fail to update my product in the Stereo Boost Pairing mode?

An unstable internet or connectivity might cause software updates to fail during the Stereo Boost Pairing mode.
Press and hold the "Bluetooth" button to quit the Stereo Boost Pairing mode, and update the speaker independently.

Was this helpful? Thank you for your feedback!
Why can't I charge my device via the Onyx Studio 9?

To ensure the best sound experience, the battery performance of the Onyx Studio 9 is adjusted under the following conditions:

1. The speaker is in battery mode and the battery level is below 30%.
2. The music volume is at or above 50%.

To charge your device, try plugging in the AC cable or lowering the music volume.

Was this helpful? Thank you for your feedback!
Which wifi standard do the BDS 280S and BDS 580S support?

BDS 280S and 580S support 802.11b, g and n. (2.4GHz ISM Band, Europe 13 Channels).

Was this helpful? Thank you for your feedback!
Which speaker stand can I use with my HKTS speaker system?

HTFS 3 will match these speakers sets: HKTS 20, HKTS 30, HKTS 60, HKTS 65 and HKTS 200. HTFS 2 will match these speakers sets: HKTS 9, HKTS 16 and HKS 4 satellite speakers.

Was this helpful? Thank you for your feedback!
Which speakers are compatible with Go + Play Mini?

Harman Kardon speakers that have the Wireless Dual Sound feature (stated on package) are compatible with the Go + Play Mini.

Was this helpful? Thank you for your feedback!
Which Music files are supported when using a USB Stick
NOTES
- Only file names that contain numbers or English characters can be displayed, otherwise “UNKNOWN” will be displayed.
- “UNSUPPORTED” is displayed when the file format is not supported.
- Do not extract the USB device while in operation.
- For a large capacity USB, it may take longer than a few minutes to be searched. USB with more than 2000 files cannot be supported.
- Devices which require additional program installation connected to a computer are not supported.
- The USB port of the soundbar cannot be connected to a computer and it cannot be used as a storage device.
- The exFAT and NTFS file system is not supported. FAT16/FAT32 systems are available.
- Depending on some devices, it may not be available to recognize the followings on the soundbar: External HDD; Card readers; Locked devices; Hard type USB devices; USB hub; Using USB extension cable; iPhone/iPod/iPad; Android device.
Was this helpful? Thank you for your feedback!
Which formats are supported by the BDS?

The BDS system supports a variety of audio and video formats. Listing all disc, surround and codec formats is beyond the scope of an FAQ. Please donwload the Owner's Manual from the harman.com website for a full list.

Was this helpful? Thank you for your feedback!
Which floor stand is used with the BDS 335 and 635 speakers?

Model HTFS 2 is used for the satellite speakers in these two BDS systems. There is no floor stand for the center speaker in the 635 system.

Was this helpful? Thank you for your feedback!
Which configuration is best to use for your OMNI BAR+ or ADAPT+

For OMNI BAR+, three sources are available: HDMI (not applicable for ADAPT+), Optical or AUX input. For Adapt+ two sources are available: Optical in/outputs and Analog in/outputs. If you select "Watching movies and TV shows" in the HK controller app for either one of them, you will have a very little delay and good lip sync with the TV for video applications. However, you will not be able to rebroadcast the TV signal to other OMNI+ speakers when selecting this mode. If you select "Listening to music", you will be able to rebroadcast TV signal to other OMNI+ speakers in your house, however, you will have lip sync delay with video material. Select that specific mode if you use HDMI (not applicable for ADAPT+), Optical or AUX for music only. Using Chromecast, Spotify Connect or Bluetooth is not part of these modes. When using one of these streaming methods, you are able to rebroadcast any music source.

Was this helpful? Thank you for your feedback!