Documents & Downloads
Specifications
- Amplifier Power (RMS)
- 60 watts min. per ch, both driven into 8 ohms from 20Hz – 20kHz @ less than 0.06% THD DIN 45500 – 75 watts @ 8 ohms
- Power Bandwidth
- 8Hz – 100kHz @ < 0.08% THD into 8 ohms both channels driven simultaneously, @ 30 watts RMS per channel
- Total Harmonic Distortion
- 0.03% 1kHz @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.05% @ rated output
- Frequency Response
- Below 3Hz – 140kHz -3.0dB
- Frequency Response
- FM – 20Hz – 15kHz (±0.5dB)
- Damping Factor
- > 30 @ 8 ohms
- Hum and Noise
- PHONO – -90dB A-weighted, IHF
- Hum and Noise
- AUX & RES – -102dB A-weighted, IHF
- Slew Rate
- 65V/usec
- Rise Time
- SQUARE WAVE – 2.5usec @ 20kHz
- Square Wave Tilt
- <2% @ 20Hz
- Negative Feedback
- 28dB
- Input Sensitivity
- PHONO – 2.2mV
- Input Sensitivity
- HIGH LEVEL – 130mV
- Phono Overload
- >225 mV
- Input Impedance
- PHONO – 47k ohms
- Quieting Sensitivity
- MONO – 3.0uV
- Quieting Sensitivity
- STEREO – 30uV
- Signal-to-Noise Ratio
- FM – -75dB
- Image Rejection
- -80dB
- IF Rejection
- -110dB
- Stereo Separation
- 55dB @ 1kHz
- Distortion
- FM MONO – 0.05% @ 1kHz, 100% modulation
- Distortion
- FM STEREO – 0.08% @ 1kHz, 100% modulation
- MSRP U.S.
- $569.95 each
- Usable Sensitivity
- FM MONO – 1.9uV
- Capture Ratio
- FM... 1.2dB
- Alternate Channel Selectivity
- FM... 75dB
- AM Rejection
- FM... -62dB
- Sensitivity
- AM... 300uV/meter
- Selectivity
- AM... -40dB
- Alternate Channel Selectivity
- AM... 35dB
- Image Rejection
- AM... -50dB @ 1kHz
- IF Rejection
- AM... -45dB @ 1kHz
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+45 32712498
Mandag - Fredag - 09:00 - 17:00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 11:00-16:00