Support Overview / Home Audio / Disc Players and Recorders / BluBlu-ray Receiver Systems / Surround Sound / BDS 570

BDS 570

Getting started with your BDS 570

Documents & Downloads

Other

Datablad (Engelsk) 445.46 KB

Specifications

Specifikationer

Power requirement: 110 – 240V AC, 50/60Hz

Power consumption: 110W maximum

Lydspecifikationer

Continuous average power, stereo mode: 65 watts per channel, 20Hz – 20kHz, @ <0.1% THD, both channels driven into 6 ohms

Multi-channel power: 65 watts per channel, 20Hz– 20kHz, @ <0.1% THD, all channels driven into 6 ohms

Input sensitivity/impedance (line inputs): 250mV/46k ohms

Signal-to-noise ratio (IHF-A): –90dB

Frequency response @ 1W (±0.5dB): 20Hz – 20kHz

Mål

Dimensions (H x W x D): 102mm x 401mm x 260mm

Weight: 6.5kg

The BDS 570 makes the perfect partner for any 5.1-channel loudspeaker system. The 3-D Blu-ray Disc™ receiver is combined with a powerful amplifier, forming one enthralling system. With Dolby® Digital and DTS® decoding, the BDS 570 plays film soundtracks in their native format for real movie-theatre surround-sound and high-resolution picture quality at home. It also has an intuitive on-screen menu to make setting up and using the receiver easy – even for novices. This A/V performer is sure to be the star at the centre of your 3-D home theatre system.

FAQs & How-Tos

2 results

Sort

Page size

Connecting ADAPT to the analog output of my BDS, delay occurs between OMNI sound and BDS speaker sound. How come?

The BDS 235 and 535 owner's manual states that you need an ADAPT to make your system wireless. You do it by connecting the BDS system's analog outputs to the ADAPT's analog AUX input. The ADAPT will then re-stream to your OMNI speakers wirelessly. However, if you listen to the OMNI speakers, and want to listen to the music directly from the BDS system at the same time, there will be a delay in the sound from the OMNI speakers. The BDS speakers will play the music first, and since the ADAPT needs to process the data wirelessly, a delay results. To avoid delay, please mute the BDS system, or connect from the ADAPT line-out to the BDS AUX in instead of the other way around. With this setup, you can only play to the BDS from an OMNI speaker, which will not be delayed in sound.

Was this helpful? Thank you for your feedback!
How does Auto Turn Off work in BDS 270 and 570?

With no signal, the BDS will turn itself off after the number of minutes you have previously set. When connected with optical cable to an external source, and with signal present, it will not turn off, even if the Auto Turn Off is on.

Was this helpful? Thank you for your feedback!