Documentos y descargas
Especificaciones del producto
- Power Requirements
- AC 120V/60Hz
- Power Consumption
- 125W idle, 1100W maximum (2 channels driven)
- MSRP U.S.
- $1799.95 each
- Continuous Average Power (FTC) per Channel (stereo mode)
- 110 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
- Amplifier Power (RMS)
- Center channel... 100 Watts @ < 0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
- Amplifier Power (RMS)
- Front L&R channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
- Amplifier Power (RMS)
- Surround channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
- High Instantaneous Current Capability (HCC)
- ± 75 Amps
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- Surround System Adjacent Channel Separation
- Analog Decoding(Pro Logic, etc.)... 40dB Dolby Digital (AC-3)... 55dB DTS Mode... 55db
- Frequency Response
- 10Hz – 100kHz (+0/-3dB @ 1 watt)
- Transient Intermodulation Distortion (TIM)
- unmeasureable
- Rise Time
- 16µsec
- Slew Rate
- 40V/µsec
- Surround Modes
- Dolby Digital and DTS surround, Harman Kardon's VMAx virtual surround sound
- Digital Inputs
- 4
- Digital Outputs
- 2
- Width
- 17-5/16 inch (440mm)
- Height
- 7-5/8 inch (193mm)
- Depth
- 20-7/16 inch (519mm)
- Weight
- 49 lb (22.3kg)
- Video Formats
- NTSC
- Input Level/Impedance
- 1Vp-p/ 75ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 5Hz–10MHz (-3db)
- Frequency Range
- FM... 87.5 – 108MHz
- Signal-to-Noise Ratio
- FM... 70dB (mono)
- Signal-to-Noise Ratio
- FM... 68dB (stereo)
- Distortion (Mono/Stereo)
- FM... 0.2%/0.3%
- Stereo Separation
- FM... 40dB @ 1kHz
- Selectivity
- FM... ± 400kHz, 65dB
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 90dB
- Tuner Output Level
- FM... 1kHz, ±75kHzDev 500mV
- Frequency Range
- AM... 520 – 1710kHz
- Signal-to-Noise Ratio
- AM... 45dB (IHF-A)
- Usable Sensitivity
- AM... Loop 500µV
- Distortion
- AM... 1kHz, 50% Mod 0.8%
- Selectivity
- AM... ± 10kHz, 30dB
High-current(+/-75 Amps), ultrawide-bandwidth(10Hz - 115kHz)amplifier effortlessly powers the most dynamic digital sources. Dual, matched discrete output devices for each channel. Massive torroidal power transformer. Dolby Digital and DTS surround-sound processing using advanced Crystal DSP engine. Factory remanufactured.
Imágenes y vídeos
