AVR 300

AVR 300

Audio/Video Receiver With Dolby Digital & DTS (60 watts x 2 | 50 watts x 5)

Vendido desde 1999 hasta 2000

Producto predecesor: AVR 35
Producto sucesor: AVR 310
Hecho en: Hong Kong

Documentos y descargas

Especificaciones del producto

Power Requirements
120V AC/60Hz
Power Consumption
72W idle, 694W maximum (2 channels driven)
Surround System Adjacent Channel Separation
Pro Logic Decoding... 40dB
Surround System Adjacent Channel Separation
Dolby Digital... 55dB
Surround System Adjacent Channel Separation
DTS... 55dB
MSRP U.S.
$699.95 each
Surround Modes
Dolby Digital, DTS surround, Harman's VMAx
Digital Inputs (coaxial/optical)
6
Digital Output
2
Dimensions (H x W x D)
Width 17-5/16 inch (440mm)
Dimensions (H x W x D)
Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.
Dimensions (H x W x D)
Depth 17-1/8 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.
Weight
31lbs ( 14.1kg)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz (-3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... 70dB
Usable Sensitivity
AM... Loop 500µV/M
Distortion
AM... 1kHz, 50% Mod 0.8%
Signal-to-Noise Ratio
FM... 68dB Stereo ( measured at amV RF Input Level)
Distortion (Mono/Stereo)
FM... 0.3%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV
Continuous Average Power (FTC) per Channel (stereo mode)
60 watts per channel @<0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Continuous Average Power (FTC) per Channel (surround modes)
50 watts per channel @<0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
High Instantaneous Current Capability (HCC)
± 35 Amps
Input Level/Impedance
250mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Not Measurable
Rise Time
16µsec
Slew Rate
40V/µsec

High-Current (+/-35 Amps), Utrawide-Bandwidth (10Hz-100kHz)Amplifier Design Effortlessly Powers the Most Dynamic Digital Sources. Dolby Digital On Board Using Advanced Crystal DSP Engine. 24-Bit/96kHz D/A Converters for Superior Digital Decoding. 6-Channel Direct Inputs for Use with External Surround Decoders.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico