AVR 146

AVR 146

Audio/Video Receiver With Dolby Digital & DTS (40 watts x 2 | 30 watts x 5)

Vendido desde 2007 hasta 2008

Producto predecesor: AVR 140
Producto sucesor: AVR 154
Hecho en: China

Documentos y descargas

Especificaciones del producto

Power Requirements
AC 120V/60Hz
Power Consumption
65W idle, 540W maximum (5 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
HDMI
Two inputs/1 output, switching only. Simplay HD verified.
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-channel input
Analog Inputs
The Bridge/DMP
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
No
Remote Control
Ten-device, programmable remote
Shipping Weight (System, Accessories, Packing)
26 lb (11.8kg)
MSRP U.S.
$349.95 each
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
40 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
30 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17-5/16 inch (440mm)
Height
6-1/2 inch (165mm)
Depth
15 inch (382mm)
Weight
21.12 lb (9.6kg)
Dimensions:
Carton Dimensions (W x H x D)
22 inch x 10-1/2 inch x 18-3/4 inch (559mm x 267mm x 476mm)
Television Format
NTSC
Input Level/Impedance
1V p-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
HDMI
Switching
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
30 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

Affordably priced, but full-featured. The AVR 146's sonic quality and sophisticated features make it an exceptional value. From two-input, Simplay HD;-verified HDMI; switching to the latest Cirrus Logic 49510 DSP, A/V Sync Delay and a high-current amplifier, the AVR 146 is modest in price, but high in performance.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico