AVR 125

AVR 125

Audio/Video Receiver With Dolby Digital & DTS (55 watts x 2 | 45 watts x 5)

Vendido desde 2002 hasta 2003

Producto predecesor: AVR 120
Producto sucesor: AVR 130

Documentos y descargas

Especificaciones del producto

Power Requirements
AC 120V/60Hz
Power Consumption
68W idle, 540W maximum (2 channels driven)
MSRP U.S.
$449.95 each
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Continuous Average Power (FTC) per Channel (stereo mode)
55 Watts per channel @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Front L & R Channels
45 Watts per channel @ <0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
Center Channel
45 Watts @ <0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
Surround Channels
45 Watts per channel @ <0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Analog Source Decoding
45dB
Dolby Digital
55dB
DTS
55dB
Weight
23.8 lb (10.8kg)
Dimensions (H x W x D)
6.6 inch x 17.3 inch x 15.4 inch (168mm x 440mm x 390mm)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz (–3dB)
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... 70/68 dBA (Mono/Stereo)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion (Mono/Stereo)
FM... 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
High Instantaneous Current Capability (HCC)
± 25 Amps

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico