AVR 2700

AVR 2700

Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (100 watts x 7) 7.1

Vendido desde 2013 hasta ahora

Producto predecesor: AVR 2650
Producto sucesor: AVR 1610
Hecho en: China

Documentos y descargas

Especificaciones del producto

Power Consumption (full power/idle)
120W idle; 1405W maximum
Transient intermodulation distortion (TIM):
Unmeasurable
Input Level/Impedance
250mV/27k ohms
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation
Dolby Pro Logix/PLII... 40dB
Surround System Adjacent Channel Separation
Dolby Digital... 55dB
Surround System Adjacent Channel Separation
DTS... 55dB
High Instantaneous Current Capability (HCC)
± 39 Amps
Transient Intermodulation Distortion (TIM)
Unmeasurable
Power Requirements
120V AC/60Hz
Power Consumption
370W Maximum, <0.5W idle
MSRP U.S.
$899.95 each
Input Sensitivity/Impedence
200mV/47k ohms
Input Level/Impedence (ohm)
1Vp-p/75 ohms
Frequency Range (MHz)
87.5MHz–108.0MHz
Selectivity (±10kHz):
30dB
Frequency Range (kHz)
520kHz – 1720kHz
Stereo Separation @ 1kHz (dB)
40dB @ 1kHz
Output Level/Impedence (ohm)
1Vp-p/75 ohms
Surround system adjacent-channel separation:
Dolby Pro Logic® I/II
Distortion (1kHz, 50% mod):
0.2%/0.3%
High Instantaneous Current Capability
±39 amps
Usable Sensitivity (Loop)
500?V
Signal-to-Noise Ratio (dB)
45dB
Signal-to-Noise Ratio (Mono/Stereo dB)
70dB/68dB
Bandwidth @ 1W (+0dB/–3dB)
10Hz – 130kHz
Distortion (Mono/Stereo)
0.80%
Signal-to-noise Ratio (IHF-A) (dB)
100dB
Usable Sensitivity (IHF)
1.3?V/13.2dBf
Selectivity (±400kHz):
70dB
Weight (lb)
16.9 lb
Width (in)
17-5/16" inches
Width (mm)
440 mm
Weight(kg)
7.7kg
Height (mm)
165mm
Height (in)
6-1/2" inches
Depth (in)
15" inches
Depth (mm)
382mm
Weight
16.9 lb (7.7 kg)
Television Format
NTSC
Video Frequency Response (Component Video)
10Hz – 8MHz (–3dB)
IF Rejection (dB)
90dB
Image Rejection (dB)
80dB
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz – 8MHz (-3dB) composite video only
HDMI
3D, Audio Return Channel, CEC and Deep Color
Frequency Range
FM... 87.5 – 108.0MHz
Usable Sensitivity
FM... 1.3V/13.2dBf
Signal-to-Noise Ratio
FM... 70/68 dBA (Mono/Stereo)
Distortion (Mono/Stereo)
FM... 0.2%/0.3%
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... 70dB @ 400kHz
Image Rejection
FM... 80dB
IF Rejection
FM... 80dB
Frequency Range
AM... 520kHz – 1710kHz
Signal-to-Noise Ratio
AM... 38dB
Usable Sensitivity
AM... 500 V in loop
Distortion
AM... 50% @ 1kHz, 0.8% mod
Selectivity
AM... 30dB @(10kHz)
Power Requirement
AC 120V/60Hz

Great entertainment deserves a great presentation.

Great entertainment deserves a great presentation.Whether its Blu-ray™ or DVD discs, HDTV, MP3s, or video games, the Harman Kardon® AVR 2700 delivers their content to you in 7.1-channel surround sound and superb video. Powered by an eco-friendly, digital power supply that delivers superior performance and 100 watts per channel without the weight of conventional designs, this receiver has all the inputs you need to handle just about any electronic entertainment, including 4K video. If you want your music from the “cloud,” it has vTuner, built-in AirPlay and DLNA® 1.5 certified Ethernet connectivity. It’s easy to handle, too, thanks to its intuitive, high-definition menu system, programmable remote control, mobile app and EzSet/EQ™ calibration to simplify setup and operation.

Harman Kardon engineers have built the AVR 2700 audio/video receiver for a premium home theater experience. No room is too big for the receiver’s high-current, 100-watt-per-channel amplifier. And speaking of the channels: With 7.1 of them, the AVR 2700 empowers you to add an extra dimension to the traditional five-channel surround-sound setup, or go with 5.1 channels in a main viewing room and use the extra two channels to power the sound in another room.
The AVR 2700 receiver can simultaneously play two different sound sources in two different zones. When you choose to connect your main system to 5.1 channels, you can use its other two sound channels as an independent system in a second room.
Hear your networked media sources as never before in pitch-perfect surround sound. DLNA 1.5 enables the AVR 2700 to stream audio from compatible devices on your home network, allowing you to enjoy them with a level of quality that you would not have thought possible.
This free, downloadable software enables your AVR 2700 to enjoy DLNA compatibility with your Mac OS devices or Windows® operating system. And it even helps organize and clean up the cover art on your music files.
Hear how truly amazing your streaming music can sound. AirPlay allows you to stream audio content from your iOS® devices and from iTunes through your AVR 2700 for superb audio.
Lighter. Greener. Louder. The AVR 2700 uses a custom designed digital power supply that delivers the amplifier power and superior sound you expect from Harman Kardon without the need for hefty transformers. The result is the same power as conventional designs with a lower overall carbon footprint impact.
The Harman Kardon EzSet/EQ system automatically sets key system parameters and fine-tunes the AVR 2700’s sound to your specific listening room with the press of a few buttons.
Your AVR 2700 doesn’t need a docking station. Instead, its front-panel USB port allows an easy-access connection point for virtual any iOS device. It even lets you access music stored on a flash drive. Furthermore, the included AVR remote gives you a convenient way to control most connected devices.
Enjoy many of your favorite radio stations, podcasts and Internet-only programming from around the globe in outstanding surround sound on your AVR 2700. vTuner® Internet radio gives you quick, easy access to a vast selection of radio stations, podcasts and internet-exclusive content from around the world.
Downloadable from the iTunes store or Google Play Market, the free HK Remote Control App allows you to transform your smartphone or tablet into an easy-to-use remote control. Compatible with most iOS and Android™ devices, its high-definition graphical user interface gives you full control of your AVR 2700 through the convenience of your favorite portable device.

Preguntas frecuentes y procedimientos

2 resultados
  • Existen cinco razones posibles por las cuales el receptor podría apagarse. 1. Hay un problema interno con el receptor. 2. Hay un problema con uno o más de sus altavoces. 3. Hay un problema con uno o más de los cables de los altavoces. 4. Hay un problema con el cableado del altavoz que se le realizó a su sistema. 5. La unidad se sobrecalentó. Sin ventilación. Primero, compruebe el cableado en cada terminal de altavoz en la parte posterior de su receptor y en la parte posterior de los altavoces. Un solo filamento de cable de altavoz que cruce de una terminal a otra es suficiente para hacer que el amplificador se apague o entre en modo PROTECT. Si no encuentra ningún problema con ninguno de los cables, desconecte todos los altavoces del receptor. Si el receptor continúa en PROTECT, el problema está en el receptor. Envíe un caso en la página Contact Us (contáctenos). Ellos lo ayudarán. Sin embargo, si el receptor se enciende, el problema es otro. Comience por reconectar un altavoz a la vez. Eventualmente conectará un altavoz que hará que el receptor se apague. En este punto debería encontrar la causa del problema. Por otro lado, puede que solo se sobrecalentara. Debe dejar al menos 2 a 3 pulgadas de espacio entre la parte superior de la unidad y cualquier estante o componente por encima de la unidad. La unidad no debe estar dentro de un compartimiento cerrado cuando se utiliza. La unidad tiene que poder respirar. Hay amplificadores muy potentes en estos receptores. Si se sobrecalientan, se apagarán. Un ventilador externo puede ser de gran ayuda.
  • Sí, en su computadora introduzca la dirección IP del receptor en el navegador de internet. En la página que se abre, es posible cambiar el nombre.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico