AVR 1710
700-watt, 7.2-channel networked AVR with AirPlay and Bluetooth connectivity
Empezando con su AVR 1710
Guía de inicio rápido
Comience a usar su producto en poco tiempo con nuestra Guía de inicio rápido fácil de seguir.
Registre su producto
¿Es propietario de este producto? ¡Regístrelo aquí! Y reclame su garantía o servicio fácilmente
Regístrese ahoraDocumentos y descargas
Especificaciones del producto
- Apple AirPlay
- Bluetooth
- Transient intermodulation distortion (TIM):
- Unmeasurable
- Power Consumption (full power/idle)
- <0.5W (standby); 510W maximum
- Stereo Power
- 100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
- Multichannel Power (all channels driven)
- 100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD
- Input Sensitivity/Impedence
- 250mV/27k ohms
- Signal-to-noise Ratio (IHF-A) (dB)
- 100dB
- Surround system adjacent-channel separation:
- Dolby Pro Logic®/DPLII
- Frequency Response
- 10Hz – 130kHz (+0dB/–3dB)
- High Instantaneous Current Capability
- ±42 amps
- Slew Rate
- 40V/sec
- Frequency Range (MHz)
- 87.5MHz – 108.0MHz
- Usable Sensitivity (IHF)
- 1.3µV/13.2dBf
- Signal-to-Noise Ratio (Mono/Stereo dB)
- 70dB/68dB
- Distortion (Mono/Stereo)
- 0.2%/0.3%
- Stereo Separation @ 1kHz (dB)
- 40dB
- Selectivity (±400kHz):
- 70dB
- IF Rejection (dB)
- 80dB
- Image Rejection (dB)
- 80dB
- Frequency Range (kHz)
- 520kHz – 1710kHz
- Signal-to-Noise Ratio (dB)
- 38dB
- Usable Sensitivity (Loop)
- 500µV
- Distortion (1kHz, 50% mod):
- 1.0%
- Selectivity (±10kHz):
- 30dB
- Input Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Output Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Width (in)
- 17-5/16
- Width (mm)
- 440
- Height (in)
- 4-3/4
- Height (mm)
- 121
- Depth (in)
- 11-13/16
- Depth (mm)
- 300
- Weight (lb)
- 11
- Weight(kg)
- 5.1
- Television Format
- NTSC
- Video Frequency Response (Composite/S-Video)
- 10Hz – 8MHz (–3dB)
- Power Requirement
- 120V AC / 60Hz
700 watt audio/video receiver that boasts multiple wireless connectivity options, six HDMI inputs
Power, performance and more connectivity options than you’ll ever need: Introducing the Harman Kardon® networked AVR 1710, the answer to any entertainment enthusiast’s hunger for performance and versatility. It’s got muscle: up to 700 watts (100 watts per channel). Its 7.2-channel A/V receiver is equipped with HARMAN TrueStream Bluetooth® connectivity, Apple AirPlay, vTuner™ Internet radio and DLNA® 1.5 technology, giving you multiple options for streaming audio. And with six 3D-ready HDMI® inputs, including one equipped for MHL to connect mobile devices, and two HDMI outputs, you’ll have more than enough ways to connect to everything you love – movies, HDTV, sports, MHL-equipped devices and the Roku Streaming Stick™ dongle. While the AVR 1710’s connectivity alone makes it desirable, its sound really strikes a chord. It’s the first Harman Kardon AVR to feature our exclusive Natural Sound Processing (NSP), which creates a rich, enveloping surround-sound from any source – particularly with two-channel streaming content. And its EzSet/EQ™ III system automatically calibrates the AVR to your speakers and listening environment. The AVR 1710 is light, too, thanks to HARMAN GreenEdge™ certification – delivering all the power you need with low environmental impact. For those who want it all, the AVR 1710 can’t be matched.<CRLF><CRLF>
The AVR 1710 high-performance audio/video receiver pumps out 100 watts per channel to power a full seven-channel surround-sound system. It can also connect to two powered subwoofers to provide enhanced low-frequency performance for all your entertainment. While the amplifier retains the time-tested, high-current-capacity (HCC), ultrawide-bandwidth Harman Kardon design to ensure the most accurate, dynamic sound with enhanced clarity and realism – even at the highest listening levels – a digitally based power supply gives the amplifiers all the muscle they need without the weight of traditional power-supply designs and their heavy transformers. The net result is a great-sounding AVR in a small form factor that’s friendly to the environment.
The AVR 1710 can stream audio from virtually any portable device. For Apple devices, such as computers and the iPad, iPhone and iPod touch, you can stream using the receiver’s built-in AirPlay technology. (AirPlay, vTuner and DLNA connections require a wired connection to a broadband network.) For other tablets, smartphones and laptops, you can take advantage of the AVR 1710’s integrated HARMAN TrueStream Bluetooth technology. A USB port is included on the front of the AVR so you can connect devices directly without an external adapter or a wireless connection. The AVR is also DLNA 1.5 compliant, which gives you multiple options for delivering content over your home network.
The HARMAN TrueStream guarantee ensures the best possible listening experience when you stream audio wirelessly via Bluetooth technology. HARMAN TrueStream tech selects the most current, most advanced wireless option to ensure the highest-quality sound, no matter what application or source device you use.
Six HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it. And with the AVR’s MHL (Mobile High-Definition Link), you can deliver high-definition audio/video content from your camera, phone, tablet or Roku Streaming Stick dongle directly to your HDTV via the AVR 1710’s MHL connection.
Is your listening room so large that you need two subwoofers to deliver the bass that you desire? That’s not a problem with the AVR 1710, thanks to dual subwoofer outputs that give your system a big-time boost in low-frequency clarity and realism when needed.
Control the audio in separate rooms with a single receiver. Thanks to the AVR 1710’s assignable amplifiers, you can power the audio in a second room without adding additional components. That means you can watch sports in one room while you play the soothing sounds of classical music in another.
The AVR 1710 gives you multiple options for audio playback with its front-panel USB port. Simply connect an iPhone, iPad, iPod or USB stick to play your stored tracks through your home entertainment system. The integrated USB port also charges your iOS devices.
The AVR 1710 takes the award-winning Harman Kardon look to a new level with a flush volume control and a more compact design aesthetic than earlier AVRs. Thanks to its light weight, made possible by an advanced digital power supply, the unit weighs less without sacrificing performance. It’s the perfect match for the thin glass shelves of today’s open TV/entertainment furniture.
The AVR 1710 delivers high-resolution audio that matches the digital-video quality of Blu-ray Disc™ formats, unlocking the full potential of movie soundtracks formatted with Dolby® TrueHD and DTS-HD Master Audio™ coding. No matter what mode or mood you are in, you’ll always hear audio playback at its finest.
The new HARMAN EzSet/EQ III auto-calibration process precisely adjusts the AVR 1710’s volume levels, speaker-distance/delay-time settings and equalization to optimize audio performance automatically for your specific speaker system and room conditions. The system features an easy-to-follow menu display and includes a plug-in calibration microphone.
Preguntas frecuentes y procedimientos
3 resultados
-
Existen cinco razones posibles por las cuales el receptor podría apagarse. 1. Hay un problema interno con el receptor. 2. Hay un problema con uno o más de sus altavoces. 3. Hay un problema con uno o más de los cables de los altavoces. 4. Hay un problema con el cableado del altavoz que se le realizó a su sistema. 5. La unidad se sobrecalentó. Sin ventilación. Primero, compruebe el cableado en cada terminal de altavoz en la parte posterior de su receptor y en la parte posterior de los altavoces. Un solo filamento de cable de altavoz que cruce de una terminal a otra es suficiente para hacer que el amplificador se apague o entre en modo PROTECT. Si no encuentra ningún problema con ninguno de los cables, desconecte todos los altavoces del receptor. Si el receptor continúa en PROTECT, el problema está en el receptor. Envíe un caso en la página Contact Us (contáctenos). Ellos lo ayudarán. Sin embargo, si el receptor se enciende, el problema es otro. Comience por reconectar un altavoz a la vez. Eventualmente conectará un altavoz que hará que el receptor se apague. En este punto debería encontrar la causa del problema. Por otro lado, puede que solo se sobrecalentara. Debe dejar al menos 2 a 3 pulgadas de espacio entre la parte superior de la unidad y cualquier estante o componente por encima de la unidad. La unidad no debe estar dentro de un compartimiento cerrado cuando se utiliza. La unidad tiene que poder respirar. Hay amplificadores muy potentes en estos receptores. Si se sobrecalientan, se apagarán. Un ventilador externo puede ser de gran ayuda.¿Te ha resultado útil? ¡Gracias por tus comentarios!
-
Sí, en su computadora introduzca la dirección IP del receptor en el navegador de internet. En la página que se abre, es posible cambiar el nombre.¿Te ha resultado útil? ¡Gracias por tus comentarios!
-
Sí, es correcto. Los modelos AVR171, 171S, 1710 y 1710S solo son compatibles con OSD en la salida HDMI 1. La salida HDMI 2 no muestra el OSD. Los AVR370 y 3700 admiten el OSD en ambas salidas HDMI.¿Te ha resultado útil? ¡Gracias por tus comentarios!
