Documentos y descargas
Especificaciones del producto
- MSRP U.S.
- $329.95 each
- Dimensions (H x W x D)
- 4-13/16 x 17-3/8 x 14-1/2
- Usable Sensitivity
- FM MONO – 2.2uV
- Quieting Sensitivity
- MONO – 3.3uV
- Quieting Sensitivity
- STEREO – 42uV
- Signal-to-Noise Ratio
- FM STEREO – -70dB
- Capture Ratio
- FM... 1.3dB
- Alternate Channel Selectivity
- AM... 35dB
- Alternate Channel Selectivity
- FM… 67dB
- IF Rejection
- 90dB AM – 45dB
- AM Rejection
- FM... 60dB
- Stereo Separation
- 40dB (1kHz)
- Total Harmonic Distortion
- FM MONO – 0.12% 1kHz, 100% Modulation
- Total Harmonic Distortion
- FM STEREO – 0.2% 1kHz, 100% Modulation
- Frequency Range
- FM DC – 90kHz (+0/-3dB) @ detector output
- Sensitivity
- AM... AM – 350uV/m
- Selectivity
- AM – 40dB
- Image Rejection
- AM – 50dB
- Amplifier Power (RMS)
- 30 watts per channel @ < 0.08% THD, primarily low order harmonic @ 8 ohms from 20 – 20kHz
- Power Bandwidth
- HALF POWER – <10Hz – 80kHz with 8 ohms
- Frequency Response
- below 3Hz – 120kHz +0,-3dB @ rated output
- Total Harmonic Distortion
- 0.04% primarily low order harmonics 1kHz @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.07% @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.02%
- Slew Rate
- 60 volts per usec
- Rise Time
- SQUARE WAVE – better than 2.5usec @ 20kHz
- Square Wave Tilt
- 5% @ 20Hz
- Negative Feedback
- 25dB
- Damping Factor
- >35 @ 8 ohms
- Hum and Noise
- PHONO – -83dB A-WTD
- Hum and Noise
- AUX & RES – -85dB A-WTD
- Input Sensitivity
- PHONO – 2.4mV AUX – 170mV
- Input Impedance
- PHONO – 47k ohms
- Phono Overload
- >100mV
- RIAA Equalization
- ±1dB
Stereo Receiver (30 watts x 2)
Imágenes y vídeos
