Documentos y descargas
Especificaciones del producto
- MSRP U.S.
- $239.95 each
- Usable Sensitivity
- FM MONO – 2.5uV (13.2dBf)
- Quieting Sensitivity
- MONO – 3.5uV (16.1dBf)
- Quieting Sensitivity
- STEREO – 45uV (38.3dBf)
- Signal-to-Noise Ratio
- FM – -65dB
- Capture Ratio
- FM... 2.0dB
- Alternate Channel Selectivity
- AM... 35dB
- Alternate Channel Selectivity
- FM… 60dB
- IF Rejection
- -90dB AM – -45dB
- AM Rejection
- FM... -50dB
- Stereo Separation
- 35dB (1kHz)
- Total Harmonic Distortion
- FM MONO -0.30% 1kHz, 100% modulation
- Total Harmonic Distortion
- FM STEREO -0.40% 1kHz, 100% modulation
- Frequency Range
- FM – DC = 60kHz, -3dB @ detector output
- Sensitivity
- AM... AM – 300uV/m
- Selectivity
- AM – -40dB
- Image Rejection
- AM – -50dB
- Amplifier Power (RMS)
- 20 watts @ < 0.12% THD primarily low order harmonics both chs @ 8 ohms from 20 – 20kHz DIN 45500 – 24.5 watts (@ 8 ohms)
- Power Bandwidth
- HALF POWER – 20Hz – 50kHz into 8 ohms
- Frequency Response
- below 3Hz-90kHz, -3dB @ rated output
- Total Harmonic Distortion
- 0.08% 1kHz @ rated output primarily low order harmonics
- Transient Intermodulation Distortion (TIM)
- 0.15% @ rated output
- Transient Intermodulation Distortion (TIM)
- 0.07%
- Slew Rate
- 40 volts/usec
- Rise Time
- SQUARE WAVE – better than 3.5usec @ 20kHz
- Square Wave Tilt
- <5% @ 20Hz
- Negative Feedback
- 30dB
- Damping Factor
- > 30 @ 8 ohms
- Hum and Noise
- PHONO – -85dB A-WTD
- Hum and Noise
- AUX & RES --95dB A-WTD
- Input Sensitivity
- PHONO – 2.5mV
- Input Sensitivity
- AUX – 180mV
- Input Impedance
- PHONO – 47k ohms
- Phono Overload
- >80mV
- RIAA Equalization
- ±1dB
Stereo Receiver (20 watts x 2)
Imágenes y vídeos
