HK 3390
Stereo Receiver (80 watts x 2)
Vendido desde 2008 hasta ahora
Producto predecesor: | HK 3385 |
---|---|
Hecho en: | China |
Documentos y descargas
Especificaciones del producto
- Power Consumption (full power/idle)
- less than 1W standby, 230W maximum (both channels driven)
- Detachable IEC Power Cord
- 382
- Power Requirements
- AC 120V/60Hz
- Power Consumption
- <1W standby, 230W maximum (both channels driven)
- Digital Inputs (coaxial/optical)
- None
- Analog Inputs
- 1 A/V on front panel
- Analog Inputs
- 3 A/V on rear panel
- Analog Inputs
- 3 audio-only
- Analog Inputs
- tuner
- On-Screen Display
- No
- Multizone Capability
- Speaker 1/2 switch
- Remote Control
- Five-device system remote
- Shipping Weight (System, Accessories, Packing)
- 25.1 lb (11.4kg)
- MSRP U.S.
- $399.95 each
- Input Sensitivity/Impedance
- Linear (High-Level)
- Signal-to-noise Ratio (IHF-A)
- 95dB
- High Instantaneous Current Capability
- ±42 Amps
- Slew Rate
- 40V/sec
- Continuous Average Power (FTC)
- 80 Watts per channel, 20Hz – 20kHz @ less than 0.07% THD, both channels driven into 8 ohms 100 Watts per channel, 20Hz – 20kHz @ less than 0.2% THD, both channels driven into 4 ohms
- # of Amplifier Channels
- 2
- Stereo Mode:
- Continuous Average Power (FTC) per Channel
- 80 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms 100 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms
- Input Level/Impedance
- 200mV/47k ohms - Linear (High-Level)
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- Frequency Response
- 10Hz – 110kHz (+0/-3dB @ 1 watt)
- Transient Intermodulation Distortion (TIM)
- Unmeasurable
- Rise Time
- 16 µsec
- Slew Rate
- 40V/µsec
- Width (mm)
- 440
- Height (in)
- 6.6
- Width (in)
- 17.3
- Depth (mm)
- 15
- Height (mm)
- 168
- Width
- 17-5/16 inch (440mm)
- Height
- 6-5/8 inch (168mm)
- Depth
- 15 inch (382mm)
- Weight
- 20.9 lb (9.5kg)
- Dimensions:
- Carton Dimensions
- 22 inch W x 10-5/8 inch H x 18-5/16 inch D (560mm x 270mm x 465mm)
- Television Format
- NTSC/PAL/SECAM
- Signal Format
- Composite
- Sync Polarity
- Negative
- Video Frequency Response
- 10Hz – 10MHz
- Output Impedence
- 75 Ohms, unbalanced
- Signal Format System
- Composite
- Input Level/Impedance
- 1Vp-p/75 ohms, unbalanced
- Output Level/Impedance
- 1V/75 ohms, unbalanced
- Frequency Range
- AM... 520 – 1720kHz
- Frequency Range
- FM... 87.5 – 108MHz
- Signal-to-Noise Ratio
- AM... >40dB
- Usable Sensitivity
- FM... IHF 1.12µV/13.5dBf
- Signal-to-Noise Ratio
- FM... Mono/Stereo 73/72dB
- Usable Sensitivity
- AM... Loop 500µV/M
- Distortion
- AM... 1kHz, 50% Mod 0.8%
- Distortion
- FM... Mono/Stereo 0.3/0.4%
- Selectivity
- AM... ± 10kHz, >25dB
- Stereo Separation
- FM... 40dB @ 1kHz
- Selectivity
- FM... ± 400kHz, 65dB
- Image Rejection
- FM... >80dB
- IF Rejection
- FM... >100dB
- Tuner Output Level
- FM... 1kHz, ±100kHz, Dev 500mV
- Power Requirement
- AC 120V/60Hz
- Amplifier Power (RMS)
- 80 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
- High Instantaneous Current Capability (HCC)
- ± 42 Amps
The HK 3390 was born to make beautiful music, and, like all specialists, it's very good at what it does. It features high-current, ultrawide bandwidth amplification, a signature Harman Kardon technology that delivers all the subtlety of an original musical performance, whether reproduced from vinyl or your MP3 player of choice. But even specialists enjoy a change of pace from time to time. So the HK 3390 also features four high-quality composite video inputs, and convenient front-panel inputs for video games and portable audio players.