PM 660
Stereo Integrated Amplifier (80 watts x 2)
Vendido desde 1981 hasta 1984
| Producto sucesor: | PM 665 |
|---|
Documentos y descargas
Especificaciones del producto
- Amplifier Power (RMS)
- 80 watts per channel @ < 0.02% THD< primarily low order harmonics
- Power Bandwidth
- HALF POWER – 10Hz – 100kHz into 8 ohms
- Frequency Response
- 4Hz – 140kHz (+0/-3dB)
- Rise Time
- SQUARE WAVE – 1.8 usec (20kHz into 8 ohms @ rated pwr output)
- Slew Rate
- 80V/usec
- Damping Factor
- < 50
- Signal-to-Noise Ratio
- AUX – 94dB, A-WTD
- Signal-to-Noise Ratio
- PHONO MM – (ref...5mV) 84dB, A-WTD
- Signal-to-Noise Ratio
- PHONO MC – 74dB, A-WTD
- Phono Overload
- MM – 200mV
- Phono Overload
- MC – 4.0mV
- RIAA Equalization
- ±0.7dB
- Phono Input Sensitivity
- RESISTANCE – 47k ohms
- Phono Input Sensitivity
- CAPACITANCE – 100pF
- Filter
- HIGHCUT – 6kHz, 12dB/octave
- Filter
- SUBSONIC – 15Hz, 12dB/octave
- Loudness Control
- +10dB @ 50Hz/+3dB @ 10kHz (volume at -40dB)
- Loudness Control
- +5dB @ 50Hz/+1.5dB @ 10kHz (volume at -15dB)
- Square Wave Tilt
- < 5% (20Hz)
- MSRP U.S.
- $594.95 each
- Dimensions (H x W x D)
- 5-1/8 x 17-3/8 x 15-15/16
Stereo Integrated Amplifier (80 watts x 2)
Imágenes y vídeos
