HK 620
Stereo Integrated Amplifier (40 watts x 2)
Vendido desde 1994 hasta 1995
| Producto predecesor: | HK 6250 |
|---|
Documentos y descargas
Especificaciones del producto
- Continuous Average Power (FTC) per Channel (stereo mode)
- 8 ohms... 40 watts @ <0.09% THD
- Continuous Average Power (FTC) per Channel (stereo mode)
- 4 ohms... 60 watts @ <0.3% THD
- Dynamic Power
- 8 ohms... 70 watts (IHF, 1kHz tone burst)
- Dynamic Power
- 4 ohms... 100 watts (IHF, 1kHz tone burst)
- Dynamic Power
- 2 ohms... 135 watts (IHF, 1kHz tone burst)
- High Instantaneous Current Capability (HCC)
- ± 40 Amps
- Power Bandwidth
- HALF POWER – <10Hz – 100kHz @ 8 ohms
- Frequency Response
- 0.5Hz – 100kHz (+0/-3dB @ 1 watt)
- Damping Factor
- 120
- Signal-to-Noise Ratio
- TUNER & CD – 98dB (ref rated power output, A-Wtd)
- Input Level/Impedance
- TUNER & CD – 135mV/22k ohms
- Tone Controls
- BASS – ±10dB @ 50Hz
- Tone Controls
- TREBLE – ±10dB @ 10kHz
- Power Supply
- AC 120/230V, 50/60Hz
- Power Consumption
- 160 watts
- MSRP U.S.
- $399.95 each
- Signal-to-Noise Ratio
- OPTIONAL PHONO (MM) – 80dB (ref rated power output, A-Wtd)
- Signal-to-Noise Ratio
- OPTIONAL PHONO (MC) – 75dB (ref rated power output, A-Wtd)
- Input Level/Impedance
- OPTIONAL PHONO (MM) – 2.2mV/47k ohms, 125pf
- Input Level/Impedance
- OPTIONAL PHONO (MC) – 120uV/56ohms
- Phono Overload
- OPTIONAL PHONO (MM) – 100mV
- Phono Overload
- OPTIONAL PHONO (MC) – 5mV
Imágenes y vídeos
