A402
Stereo Integrated Amplifier (40 watts x 2)
Vendido desde 1977 hasta 1977
| Producto sucesor: | HK 505 |
|---|
Documentos y descargas
Especificaciones del producto
- MSRP U.S.
- $374.95 each
- Input Impedance
- AUX – 33k ohms
- Input Impedance
- PHONO – 47k ohms
- Input Impedance
- TAPE MON – 33k ohms
- Input Sensitivity
- AUX – 125 millivolts
- Input Sensitivity
- PHONO – 2.2 millivolts
- Input Sensitivity
- TAPE MON – 125 millivolts
- Signal-to-Noise Ratio
- AUX – -77dB
- Signal-to-Noise Ratio
- PHONO – -69dB
- Signal-to-Noise Ratio
- TAPE MON – -77dB
- Total Harmonic Distortion
- AUX – 0.1%
- Total Harmonic Distortion
- PHONO – 0.5%
- Total Harmonic Distortion
- TAPE MONITOR – 0.1%
- Output Level/Impedance
- PHONO – <600 ohms
- Phono Overload
- 90 millivolts
- RIAA Equalization
- ±1.0dB (20Hz - 20kHz)
- Filter
- HIGHCUT – -3dB @ 3.5kHz, 6dB per octave slope
- Filter
- LOWCUT – -3dB @ 65Hz, 12dB per octave slope
- Amplifier Power (RMS)
- 40 watts/channel @ 8 ohms (20Hz – 20kHz) with <0.1%THD
- Power Bandwidth
- <10Hz to 60kHz @ <0.1% THD into 8 ohms
- Frequency Response
- below 4Hz – 160kHz -3dB, below 4Hz – 100kHz -1dB
- Rise Time
- SQUARE WAVE – <3 microseconds
- Rise Time
- SQUARE WAVE – 1.5 microseconds
- Square Wave Tilt
- <5% @ 20Hz
- Total Harmonic Distortion
- <0.1% from 250 milliwatts to 40 watts RMS
- Transient Intermodulation Distortion (TIM)
- < 0.08% @ 40 watts, < 0.04% @ 1 watt
- Hum and Noise
- better than 100dB below 40 watts
- Input Impedance
- 33k ohms
- Damping Factor
- >50 1kHz @ 1 watt
Imágenes y vídeos
