PA 2000
4-Channel Power Amplifier (45 watts x 4 | 100 watts x 2)
Vendido desde 2000 hasta 2004
| Hecho en: | South Korea |
|---|
Documentos y descargas
Especificaciones del producto
- Power Output, Normal Mode
- 4 x 45 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
- Power Output, Bridged Mode
- 2 x 100 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
- Frequency Response
- <1Hz – 170kHz (-3dB @ 1 watt)
- Signal-to-Noise Ratio
- 110dB @ Rated power 45 watts
- Total Harmonic Distortion
- Less than 0.07% @ rated output
- Power Bandwidth
- <1Hz – 100kHz
- Input Impedance
- 47k ohms
- Input Sensitivity
- 1 Volt for rated output
- Remote Trigger Voltage
- 3 – 30 Volts AC/DC
- Remote Trigger Impedance
- 20k ohms
- Power Requirements
- AC 120V/50 – 60Hz
- Power Consumption
- 260 Watts maximum
- MSRP U.S.
- $599.95 each
- Weight
- 25.3 lb (11.4kg)
- Dimensions (H x W x D)
- 6-1/8 inch x 17-3/8 inch x 15-3/4 inch (155mm x 442mm x 400mm)
- High Instantaneous Current Capability (HCC)
- ± 45 Amps
Add remote rooms or additional channels to an existing surround system with this high-current, bridgeable amplifier. Fan-free for ultraquiet operation, the PA 2000's design is optimized for the requirements of the long signal paths found in multiroom systems.
Imágenes y vídeos
