TA 600

TA 600

Stereo Receiver (38 watts x 2)

Vendido desde 1976 hasta 1977

Producto predecesor: 630
Producto sucesor: HK 450

Documentos y descargas

Especificaciones del producto

MSRP U.S.
$399.95 each
Usable Sensitivity
2.5 microvolts, IHF
Signal-to-Noise Ratio
60dB
Capture Ratio
FM... 2.5dB
Alternate Channel Selectivity
60dB
Image Rejection
-50dB
Spurious Response Rejection
-60dB
IF Rejection
-70dB
Input Impedance
PHONO – 47k
Input Impedance
AUX & TAPE – 30k
Input Sensitivity
PHONO – 2.6mV
Input Sensitivity
AUX & TAPE – 180mV
Signal-to-Noise Ratio
PHONO – -60dB
Signal-to-Noise Ratio
AUX, TAPE & RES – -75dB
Phono Overload
80mV
RIAA Equalization
±1.5dB
Crosstalk
PHONO – 35dB
Crosstalk
AUX & TAPE – 40dB
Tone Controls
BASS – ±12dB @ 50Hz
Tone Controls
TREBLE – ±12dB @ 10kHz
Loudness Control
-10dB @ 50Hz (40dB below full power output)
Continuous Average Power (FTC) per Channel (stereo mode)
38 watts RMS per channel @ 8 ohms from 20Hz – 20kHz with < 0.3% THD
Power Bandwidth
10Hz to 40kHz @ < 0.3% THD into 8 ohms both driven simultaneously @ 19 watts/ch
Frequency Response
20Hz – 20kHz (±0.5dB)
Rise Time
<3 microseconds
Square Wave Tilt
< 10% @ 20Hz
Total Harmonic Distortion
0.12% (SMPTE) @ rated power output
Transient Intermodulation Distortion (TIM)
< 0.3% from 250 milliwatts to 38 watts RMS both driven simult. @ 8 ohms 20Hz – 20kHz
Damping Factor
> 30

Stereo Receiver

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico