AVR 7200

AVR 7200

Audio/Video Receiver With Dolby Digital & DTS (115 watts x 2 | 100 watts x 7)

Vendido desde 2003 hasta 2003

Producto predecesor: AVR 8000
Producto sucesor: AVR 7300
Hecho en: China

Documentos y descargas

Especificaciones del producto

Power Requirements
120V AC/60Hz
Power Consumption
120W @ idle, 1,040W @ rated output (7 channels driven)
MSRP U.S.
$1999.95 each
Continuous Average Power (FTC) per Channel (stereo mode)
115 Watts per channel @ <0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms
Front L & R Channels
100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
100 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels (L & R Side, L & R Back)
100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
17.3 inch (440mm)
Height
7.6 inch (194mm)
Depth
2.5 inch (521mm)
Weight
59.1 lb (26.9kg)
Dimensions:
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 50MHz (–3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70dB/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod. 0.8%
Distortion
FM... Mono/Stereo 0.2%/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
High Instantaneous Current Capability (HCC)
± 75 Amps

The AVR 7200's seven-channel, high-current, ultrawide-bandwidth amplifier is the most powerful ever in a Harman Kardon receiver. A comprehensive bass management system with Triple Crossover selection makes certain that low-frequency sound goes to the right place no matter what type of speakers you own or input you use, including DVD-Audio or SACD. Multiroom options range from assignable rear-channel amplifiers to an A-BUS Ready port, which allows complete remote-room control and amplification with only one Cat. 5 wire connection. A preprogrammed remote with an LCD display and EzSet;, an RS-232 port and a complete range of surround processing options all contribute to the AVR 7200's spectacular music and home theater performance.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico