AVR 7000

AVR 7000

Audio/Video Receiver With Dolby Digital & DTS (110 watts x 2 | 100 watts x 5)

Vendido desde 1999 hasta 2001

Producto predecesor: AVR 85
Producto sucesor: AVR 8000
Hecho en: China

Documentos y descargas

Especificaciones del producto

Power Requirements
AC 120V/60Hz
Power Consumption
125W idle, 1100W maximum (2 channels driven)
MSRP U.S.
$1799.95 each
Continuous Average Power (FTC) per Channel (stereo mode)
110 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Amplifier Power (RMS)
Center channel... 100 Watts @ < 0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
Amplifier Power (RMS)
Front L&R channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
Amplifier Power (RMS)
Surround channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
High Instantaneous Current Capability (HCC)
± 75 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Surround System Adjacent Channel Separation
Analog Decoding(Pro Logic, etc.)... 40dB Dolby Digital (AC-3)... 55dB DTS Mode... 55db
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
unmeasureable
Rise Time
16µsec
Slew Rate
40V/µsec
Surround Modes
Dolby Digital and DTS surround, Harman Kardon's VMAx virtual surround sound
Digital Inputs
4
Digital Outputs
2
Width
17-5/16 inch (440mm)
Height
7-5/8 inch (193mm)
Depth
20-7/16 inch (519mm)
Weight
49 lb (22.3kg)
Video Formats
NTSC
Input Level/Impedance
1Vp-p/ 75ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
5Hz–10MHz (-3db)
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
FM... 70dB (mono)
Signal-to-Noise Ratio
FM... 68dB (stereo)
Distortion (Mono/Stereo)
FM... 0.2%/0.3%
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHzDev 500mV
Frequency Range
AM... 520 – 1710kHz
Signal-to-Noise Ratio
AM... 45dB (IHF-A)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Selectivity
AM... ± 10kHz, 30dB

High-current(+/-75 Amps), ultrawide-bandwidth(10Hz - 115kHz)amplifier effortlessly powers the most dynamic digital sources. Dual, matched discrete output devices for each channel. Massive torroidal power transformer. Dolby Digital and DTS surround-sound processing using advanced Crystal DSP engine. Factory remanufactured.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico