PT 2300

PT 2300

Stereo Preamp/Tuner

Vendido desde 1993 hasta 1995

Hecho en: Japan

Documentos y descargas

Especificaciones del producto

Usable Sensitivity
FM... MONO – 11.2dB
Quieting Sensitivity
FM... STEREO – 37.2dB
Signal-to-Noise Ratio
FM... MONO – 80dB @ 65dB
Signal-to-Noise Ratio
FM... STEREO – 74dB @ 65dB
Capture Ratio
FM... 1.5dB
Alternate Channel Selectivity
FM... 70dB
Selectivity
FM... ADJACENT CHANNEL – 5dB
IF Rejection
FM... 80dB
Image Rejection
FM... 45dB
AM Rejection
FM... 45dB
Stereo Separation
FM... 50dB (@ 1kHz, 65dBf)
Total Harmonic Distortion
FM... MONO – 0.08% @ 1kHz, 65dBf
Total Harmonic Distortion
FM... STEREO – 0.09% @ 1kHz, 65dBf
Sensitivity
AM... EXTERNAL ANTENNA – 25uV
Alternate Channel Selectivity
AM... 55dB
Image Rejection
AM... 40dB
IF Rejection
AM... 40dB
Output Level/Impedance
0.8 Volts @ < 0.005% THD (10 ohms Load, 20Hz – 20kHz)
Output Level/Impedance
MAXIMUM – 6.0 Volts (0.1% THD)
Output Level/Impedance
620 ohms
Output Level/Impedance
SUBWOOFER – 2.0V/10k ohms
Negative Feedback
18dB
Frequency Response
0.5Hz – 200kHz (±3dB)
Slew Rate
50 Volts/Sec
Rise Time
1.5usec
Transient Intermodulation Distortion (TIM)
Unmeasurable
Signal-to-Noise Ratio
PHONO MM – 88dB
Signal-to-Noise Ratio
CD, AUDIO/VIDEO & TAPE – 96dB
Input Level/Impedance
PHONO MM – 2.2mV/47k ohms, 125pF
Input Level/Impedance
CD, AUDIO/VIDEO & TAPE – 135 mV/22k ohms
RIAA Equalization
±0.5dB (20Hz - 20kHz)
Phono Overload
100mV
Tone Controls
BASS – ±10dB @ 50Hz
Tone Controls
TREBLE – ±10dB @ 10kHz
Loudness Control
50Hz @ -40dB

Dolby Pro Logic decoding never sounded - or looked - so good. A full-function Dolby Pro Logic preamp/tuner with 5 audio inputs, 3 video inputs, and VCR-dubbing capability. Front, center, surround and subwoofer outputs, along with a system remote and more, complete this powerful, elegant package. Amplifier required. Factory

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico