Documentos y descargas
Especificaciones del producto
- Continuous Average Power (FTC) per Channel (stereo mode)
- 8 ohms 0.08% RMS ... 190W, 140W
- High Instantaneous Current Capability (HCC)
- ± 85 Amps
- Power Bandwidth
- HALF POWER – <10Hz – >100kHz
- Frequency Response
- 0.16Hz – 200kHz, 0.16Hz – 150kHz (-3dB)
- Rise Time
- SQUARE WAVE – 2u sec
- Input Sensitivity
- CD – 135mV (at 170W output)
- Input Sensitivity
- PHONO MM – 2.0mV, 2.2mV (at 170W output)
- Input Sensitivity
- PHONO MC – 110uV, 130uV (at 170W output)
- Signal-to-Noise Ratio
- CD – 78dB
- Signal-to-Noise Ratio
- PHONO MM – 77.6dB
- Signal-to-Noise Ratio
- PHONO MC – 74dB
- Channel Separation
- CD – 46dB @ 10kHz
- Channel Separation
- PHONO MM – 48.2dB @ 10kHz
- Channel Separation
- PHONO MC – 49.6dB @ 10kHz
- Transient Intermodulation Distortion (TIM)
- 0.039%
- Damping Factor
- 100 @ 1kHz
- Tone Controls
- BASS – ±10dB @ 50Hz
- Tone Controls
- TREBLE – ±10dB @ 10kHz
- Filter
- SUBSONIC – 15Hz, 3dB
- Loudness Control
- PHASE CORRECT – 6dB @ 50Hz
- RIAA Equalization
- TAPE OUT – 0.2dB (20Hz – 20kHz 10k ohm load)
- Phono Overload
- PHONO MM – 168mV
- Phono Overload
- PHONO MC – 8.5mV
- MSRP U.S.
- $1300 each
Imágenes y vídeos
