PA 2000

PA 2000

4-Channel Power Amplifier (45 watts x 4 | 100 watts x 2)

Vendido desde 2000 hasta 2004

Hecho en: South Korea

Documentos y descargas

Especificaciones del producto

Power Output, Normal Mode
4 x 45 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
Power Output, Bridged Mode
2 x 100 Watts @ 8 ohms, 20Hz – 20kHz, <0.07% THD, all channels driven
Frequency Response
<1Hz – 170kHz (-3dB @ 1 watt)
Signal-to-Noise Ratio
110dB @ Rated power 45 watts
Total Harmonic Distortion
Less than 0.07% @ rated output
Power Bandwidth
<1Hz – 100kHz
Input Impedance
47k ohms
Input Sensitivity
1 Volt for rated output
Remote Trigger Voltage
3 – 30 Volts AC/DC
Remote Trigger Impedance
20k ohms
Power Requirements
AC 120V/50 – 60Hz
Power Consumption
260 Watts maximum
MSRP U.S.
$599.95 each
Weight
25.3 lb (11.4kg)
Dimensions (H x W x D)
6-1/8 inch x 17-3/8 inch x 15-3/4 inch (155mm x 442mm x 400mm)
High Instantaneous Current Capability (HCC)
± 45 Amps

Add remote rooms or additional channels to an existing surround system with this high-current, bridgeable amplifier. Fan-free for ultraquiet operation, the PA 2000's design is optimized for the requirements of the long signal paths found in multiroom systems.

¿No encuentras lo que buscas?

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico