AVR 145

AVR 145

Audio/Video Receiver With Dolby Digital & DTS (50 watts x 2 | 40 watts x 5)

Verkauft von 2006 bis 2007

Vorgänger-Produkt: AVR 140
Nachfolgeprodukt: AVR 147
Hergestellt in: China

Dokumente & Downloads

Produktdetails

Power Requirements
AC 220 – 240V/50Hz
Power Consumption
65W idle, 540W maximum (6 channels driven)
Digital Inputs (coaxial/optical)
2/2 on rear; 1/1 on front
Analog Inputs
1 A/V on front panel
Analog Inputs
2 audio-only
Analog Inputs
3 A/V on rear panel
Analog Inputs
6-channel input
Analog Inputs
The Bridge
Analog Inputs
tuner
On-Screen Display
Yes
Multizone Capability
No
Auto Setup
EzSet remote control
Remote Control
Eight-device, programmable remote
Shipping Weight (System, Accessories, Packing)
13.2kg
MSRP U.S.
$549.95 each
# of Amplifier Channels
5
Continuous Average Power (FTC) per Channel (stereo mode)
50 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Front L & R Channels
40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
40 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels
40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
100dB (IHF-A)
Surround System Adjacent Channel Separation:
Dolby Pro Logic I and II
40dB
Dolby Digital
55dB
DTS
55dB
Frequency Response
10Hz – 130kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Unmeasurable
Slew Rate
40V/µsec
Width
440mm
Height
150mm
Depth
382mm
Weight
9.7kg
Dimensions:
Carton Dimensions (W x H x D)
559mm x 267mm x 476mm
Television Format
PAL, NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response:
Composite and S-Video
10Hz – 8MHz (–3dB)
Component Video
10Hz – 100MHz (–3dB)
Frequency Range
AM... 520 – 1720kHz
Frequency Range
FM... 87.5 – 108.0MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... Mono/Stereo 70/68dB
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Distortion
FM... Mono/Stereo 0.2/0.3%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 70dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Amplifier Power (RMS)
40 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)
High Instantaneous Current Capability (HCC)
± 25 Amps

Affordably priced, but full-featured. The AVR 145's sonic quality and sophisticated features make it an exceptional value. From RS-232 software upgradeability to the latest Cirrus Logic 49500 series DSP, Logic 7 processing, A/V Sync Delay and 100MHz component video switching, the AVR 145 is modest in price, but high in performance.

FAQs & How-To

2 Ergebnisse

Sie können nicht finden, wonach Sie suchen?

Rufen Sie uns an

Rufen Sie uns an

Rufen Sie uns jetzt unter folgender Nummer an: +41 225 912 934

Montag - Freitag: 10:00-17:00
Samstag - Sonntag: 10:00-16:00

Schreiben Sie uns eine Email

Schreiben Sie uns eine Email

Wir sind Montag-Sonntag für Sie da, um Ihre E-Mail schnellstmöglich zu beantworten.

Schreiben Sie uns eine Email
Chatten Sie mit uns

Chatten Sie mit uns

Montag - Freitag: 10:00-17:00
Samstag - Sonntag: 10:00-16:00

message

WhatsApp uns

Senden Sie uns eine Nachricht hier 

Montag - Freitag: 10.00-17.00
Samstag - Sonntag: 10:00-16:00