Home Suporte / Home Audio / Receptores / Receptores - Som Surround / AVR 147

AVR 147

Audio/Video Receiver With Dolby Digital & DTS & HDMI Switching (50 watts x 2 | 40 watts x 5)

Vendido de 2007 até 2008

Produto anterior:	AVR 145
Produto sucessor:	AVR 154
Feito em:	China
Nota:	This is the first entry level receiver to have HDMI Switching

Documentos & Downloads

Guia Rápido

Guia Rápido para Iniciantes (Inglês) 1.6 MB

Outros

Packaging and Accessories (Inglês) 445.63 KB

Especificações de Produto

Especificações Gerais

Power Requirements: AC 120V/60Hz

Power Consumption: 65W idle, 540W maximum (5 channels driven)

Digital Inputs (coaxial/optical): 2/2 on rear; 1/1 on front

HDMI: Two inputs/1 output, switching only. Simplay HD verified.

Analog Inputs: 1 A/V on front panel

Analog Inputs: 2 audio-only

Analog Inputs: 3 A/V on rear panel

Analog Inputs: 6-channel input

Analog Inputs: The Bridge/DMP

Analog Inputs: tuner

On-Screen Display: Yes

Multizone Capability: No

Auto Setup: EzSet/EQ room equalization

Remote Control: Ten-device, programmable remote

Shipping Weight (System, Accessories, Packing): 26.2 lb (11.9kg)

MSRP U.S.: $449.95 each

Especificações de Áudio

# of Amplifier Channels: 5

Continuous Average Power (FTC) per Channel (stereo mode): 50 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms

Front L & R Channels: 40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Center Channel: 40 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Surround Channels: 40 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 100dB (IHF-A)

Surround System Adjacent Channel Separation:

Dolby Pro Logic I and II: 40dB

Dolby Digital: 55dB

DTS: 55dB

Frequency Response: 10Hz – 130kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Slew Rate: 40V/µsec

Dimensões

Width: 17-5/16 inch (440mm)

Height: 6-1/2 inch (165mm)

Depth: 15 inch (382mm)

Weight: 21.3 lb (9.7kg)

Dimensions:

Carton Dimensions (W x H x D): 22 inch x 10-1/2 inch x 18-5/16 inch (559mm x 267mm x 465mm)

Video Specifications

Television Format: NTSC

Input Level/Impedance: 1V p-p/75 ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response:

Composite and S-Video: 10Hz – 8MHz (–3dB)

Component Video: 10Hz – 100MHz (–3dB)

HDMI: Switching

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108.0MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 70/68dB

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.2/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 70dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Amplifier Specifications

Amplifier Power (RMS): 40 x 5 @ 8 ohms (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 25 Amps

Fully connected! That is a perfect description of the AVR 147, where two-input, Simplay HD;-verified HDMI; switching, two 100MHz-capable component video inputs, a wealth of digital audio inputs and both XM Ready and The Bridge connections let you connect and command virtually any home theater source. Logic 7 processing, EzSet/EQ; technology and high-current amplification take care of the audio, to provide you with the best sound.