Support Overzicht / Home Audio / Receivers / Receivers - Surround Sound / AVR 500

AVR 500

Audio/Video Receiver With Dolby Digital & DTS (80 watts x 2 | 70 watts x 5)

Verkocht vanaf 1999 tot 2000

Voorganger product:	AVR 65
Opvolger product:	AVR 510
Gemaakt in:	Hong Kong

Downloads

Handleidingen

Gebruiksaanwijzing (Engels) 505.49 KB

Product Specificaties

Algemene specificaties

Power Requirements: 120V AC/60Hz

Power Consumption: 78W idle, 694W maximum (2 channels driven)

Surround System Adjacent Channel Separation: Pro Logic Decoding... 40dB

Surround System Adjacent Channel Separation: Dolby Digital... 55dB

Surround System Adjacent Channel Separation: DTS... 55dB

MSRP U.S.: $899.95 each

Audio specificaties

Surround Modes: Dolby Digital, DTS surround, Harman's VMAx

Digital Inputs (coaxial/optical): 4

Digital Output: 2

Afmetingen / Gewicht

Dimensions (H x W x D): Width 17-5/16 inch (440mm)

Dimensions (H x W x D): Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.

Dimensions (H x W x D): Depth 17-1/8 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.

Weight: 34lbs ( 15.5kg)

Specificaties voor video

Television Format: NTSC

Input Level/Impedance: 1Vp-p/75ohms

Output Level/Impedance: 1V/75 ohms

Video Frequency Response: 10Hz – 8MHz

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... 45dB

Usable Sensitivity: FM... IHF 1.3mu;V/13.2dB

Signal-to-Noise Ratio: FM... 70dB Mono ( measured at amV RF Input Level)

Usable Sensitivity: AM... Loop 500µV

Distortion: AM... 1kHz, 50% Mod 0.8%

Signal-to-Noise Ratio: FM... 68dB Stereo ( measured at amV RF Input Level)

Distortion (Mono/Stereo): FM... 0.3%/0.3%

Selectivity: AM... ± 10kHz, 30dB

Stereo Separation: FM... 40dB @1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... 80dB

IF Rejection: FM... 90dB

Tuner Output Level: FM... 1kHz, ±75kHz Dev 500mV

Amplifier Specifications

Continuous Average Power (FTC) per Channel (stereo mode): 80 watts per channel @<0.07% THD, 20Hz – 20kHz, both channels driven into 8 ohms

Continuous Average Power (FTC) per Channel (surround modes): 70 watts per channel @<0.07% THD, 20Hz – 20kHz, all channels driven into 8 ohms

High Instantaneous Current Capability (HCC): ± 45 Amps

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB

Frequency Response: 10Hz – 100kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Not Measurable

Rise Time: 16µsec

Slew Rate: 40V/µsec

High-Current (+/-45 Amps), Utrawide-Bandwidth (10Hz-100kHz) Amplifier Design. Dolby Digital and DTS Surround-Sound Processing Using Advanced Crystal DSP Engine. Harman Kardon Exclusive Logic 7 Cinema and Music Surround-Sound Processing. Prior season's model.

Meer support

1 resultaten

Sorteren

Paginagrootte

Waarom reageert de AVR niet als ik de afstandsbediening gebruik, terwijl mijn andere producten wel prima werken?

De afstandsbediening kan slechts één apparaat tegelijk bedienen (tenzij u geavanceerde functies hebt geprogrammeerd, zoals volume, kanaal of punch-through-transportbesturing). Wanneer u op de bronselectie drukt om uw andere product te bedienen, zoals de DVD-speler, kan de afstandsbediening geen ander product bedienen, met inbegrip van de AVR, totdat u nogmaals op de AVR-knop drukt. Om uw probleem in de toekomst te voorkomen, moet u altijd de AVR-knop of passende bronselectie indrukken voordat u een opdracht invoert.

Ben je hiermee geholpen? Bedankt voor je feedback!