AVR 45

AVR 45

Audio/Video Receiver With Dolby Digital (65 watts x 2 | 55 watts x 5)

Verkocht vanaf 1998 tot 1999

Voorganger product: AVR 40
Opvolger product: AVR 210
Gemaakt in: Hong Kong

Downloads

Product Specificaties

Power Requirements
120V AC/60Hz
Surround System Adjacent Channel Separation
Pro Logic Decoding... 40dB
Power Consumption
72W idle, 332W maximum (2 channels driven)
Surround System Adjacent Channel Separation
Dolby Digital... 55dB
Frequency Response
8Hz – 80kHz (+1/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Not Measurable
Rise Time
16µsec
Slew Rate
40V/µsec
MSRP U.S.
$899.95 each
Front L & R Channels
55 watts per channel, @ 0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel
55 watts per channel, @0.07% THD, 20Hz – 20kHz into 8 ohms
Rear Channels:
55 watts per channel, @0.07% THD, 20Hz – 20kHz into 8 ohms
Dimensions (H x W x D)
Width 17-1/3 inch (440mm)
Dimensions (H x W x D)
Height 6-1/2 inch (165mm) Height measurement includes feet and chassis.
Dimensions (H x W x D)
Depth 17-1/10 inch (435mm) Depth measurement includes knobs, buttons and terminal connections.
Weight
25lbs ( 13.2kg)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz to 8MHz (-3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 45dB
Usable Sensitivity
FM... IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio
FM... 70dB Mono ( measured at amV RF Input Level)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Signal-to-Noise Ratio
FM... 68dB Stereo ( measured at amV RF Input Level)
Distortion (Mono/Stereo)
FM... 0.3%/0.5%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV
Continuous Average Power (FTC) per Channel (stereo mode)
65 Watts per channel 20Hz – 20kHz... @<0.07% THD, both channels driven into 8 ohms
High Instantaneous Current Capability (HCC)
± 35 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB

Advanced Dolby Digital Performance at a moderate price. The AVR 45 offers HCC capability and Ultrawide Bandwidth design, and the advanced Crystal Circuit for extraordinary performance, rivaled only by top of the line conventional receivers. Prior season's model.

Kan je niet vinden wat je zoekt?

Bel onze support-afdeling

Bel onze support-afdeling

Bel ons nu op: +32 (0) 28080136

Maandag - Vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00

Stuur een email aan onze support-afdeling

Stuur een email aan onze support-afdeling

We zijn er van maandag t/m zondag om je vragen zo snel mogelijk te beantwoorden!

Stuur ons een email
Chat met onze support-afdeling

Chat met onze support-afdeling

Chat is open op werkdagen tussen 09:00 en 18:00 en van 10:00 - 16:00 in het weekend.

message

WhatsApp Ons

Stuur ons een bericht hier 

Maandag - vrijdag: 09.00-18.00
Zaterdag - Zondag: 10:00-16:00