Support Overzicht / Home Audio / Receivers / Receivers - Stereo / HK 3385

HK 3385

Stereo Receiver (80 watts x 2)

Verkocht vanaf 2007 tot 2007

Voorganger product:	HK 3380
Opvolger product:	HK 3390
Gemaakt in:	China

Downloads

Handleidingen

Gebruiksaanwijzing (Engels) 3.03 MB

Overige

Packaging and Accessories (Engels) 437.92 KB

Product Specificaties

Algemene specificaties

Power Requirements: AC 120V/60Hz

Power Consumption: 3W standby, 200W maximum (both channels driven)

Digital Inputs (coaxial/optical): None

Analog Inputs: 1 A/V on front panel

Analog Inputs: 3 A/V on rear panel

Analog Inputs: 3 audio-only

Analog Inputs: tuner

On-Screen Display: No

Multizone Capability: Speaker A/B switch

Remote Control: Five-device system remote

Shipping Weight (System, Accessories, Packing): 25.1 lb (11.41kg)

MSRP U.S.: $349.95 each

Audio specificaties

# of Amplifier Channels: 2

Stereo Mode:

Continuous Average Power (FTC) per Channel: 80 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms 100 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Frequency Response: 10Hz – 110kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Rise Time: 16 µsec

Slew Rate: 40V/µsec

Afmetingen / Gewicht

Width: 17.4 inches (442mm)

Height: 6.6 inches (168mm)

Depth: 15 inches (382mm)

Weight: 20.9 lb (9.48kg)

Dimensions:

Carton Dimensions: 21.5 inches x 9.9 inches x 17.9 inches (545mm x 251mm x 455mm)

Specificaties voor video

Television Format: NTSC/PAL/SECAM

Signal Format System: Composite

Input Level/Impedance: 1V p-p/75 ohms, unbalanced

Sync Polarity: Negative

Output Level/Impedance: 1V/75 ohms, unbalanced

Video Frequency Response: 10Hz – 10MHz

Tuner Specifications

Frequency Range: AM... 520 – 1710kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... >40dB

Usable Sensitivity: FM... IHF 1.12µV/13.5dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 73/72dB

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.3/0.4%

Selectivity: AM... ± 10kHz, >25dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... >80dB

IF Rejection: FM... >100dB

Tuner Output Level: FM... 1kHz, ±100kHz, Dev 500mV

Amplifier Specifications

Amplifier Power (RMS): 80 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 42 Amps

The perfect match for a main music system, your office or that special place for relaxation, the HK 3385 is music at its best. It uses the same high-current, ultrawide-bandwidth amplifier design found in our AVR Series receivers, and has four video inputs, a phono input and a cable for direct audio/video connection to an iPod or MP3 player, all controlled by a multicomponent remote. Let the HK 3385 make beautiful music for you.