Omni 50+

Omni 50+

Wireless HD Indoor/ Outdoor speaker with rechargeable battery

Getting started with your Omni 50+

Getting started with your Omni 50+

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Frequency response
50Hz~20kHz -6dB
Power consumption in sleep mode
2.4 Watts/Hour
Signal-to-noise ratio
>80dB
Input connections
Bluetooth®, Aux-in, Wi-Fi
Power supply
19VDC, 3.0A
Power consumption in sleep mode
<3.0 Watts
Transducers
2 x 90mm woofers, 2 x 19mm tweeters
Rated power
4 x 25W
Weight
3340g
Dimensions (W x D x H)
333mm x 175mm x 215mm

Easily stream wireless music inside or outside of your home

The HK Omni 50+ let’s you easily set up a wireless HD music system anywhere inside or outside your home. It is an all-weather speaker with a rechargeable battery that adds access to streaming services like Spotify Connect and Chromecast built-in, so you can enjoy your favorite music anywhere in your home – indoors or outdoors. Wireless music made easy with the added freedom to go anywhere you do.

Seamlessly stream your favorite music all over your home – indoors or outdoors - and to any Harman Kardon Omni+ wireless HD products. Listen to different music in any room of your home, even outside.
Stream your favorite songs and playlists wirelessly inside or outside your home with Spotify Connect, using the Spotify app as a remote. Spotify Connect feature requires Spotify Premium subscription.
With Chromecast built-in, you can cast your favorite music, radio stations and podcasts from your mobile device to your speakers. Chromecast built-in may require subscription(s).
You can carry the Omni 50+ anywhere you want to go around the house. With a convenient handle and a built-in battery that can support up to 5 hours playback time,
The Omni 50+ is a splash-proof, and weather proof indoor and outdoor speaker. It features an IPX5 rated splash proof design allowing you to keep the music going even in heavy rain.
The Harman Kardon Omni 50+ supports 24bit / 192kHz HD audio streaming. Enjoy a superior audio experience, with higher audio quality than from a CD
Easily set up your system and control it with the Harman Kardon Controller app. With additional support for WAC on Apple devices and a step by step in-app guide you can quickly start streaming your music.
Connect any device via Bluetooth or 3.5mm input to your Omni 50+ and it will automatically steam your music to any other Harman Kardon Omni+ speakers in your home wirelessly.
Supports the latest 802.11AC wireless home networking technology and dual band (both 2.4GHz and 5GHz) Wi-Fi connection, resulting in a faster, robust and more stable wireless connection.

FAQs & How-Tos

19 results
  • No, stereo pairs must be two of the same type of speaker. For example, two Omni 10 or two Omni 10+ speakers will work, but not one Omni 10 and one Omni 10+.
  • Streaming via Bluetooth or direct aux in connection are supported without the HK Controller app. For OMNI+ devices that you already have placed in a room, they are capable of using either Spotify Connect or Chromecast built-in without the need of using the HK Controller app. Use only the HK Controller app for setting up any OMNI+ devices you may have.
  • There is a reset button on the bottom of the Omni+ devices. Press and hold this button for 5 seconds to perform a factory reset of your product. All product settings, Wi-Fi, and Bluetooth connections will be erased. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • The reset procedure is quite different from the rest of the OMNI+ series. To reset the OMNI 50+ speaker, please do the following: First, press & hold ‘Source’, ‘Vol+’, ‘Vol-‘ buttons at the same time. The Omni 50+ will switched off, indicating that the product was successful reset. Secondly, press ‘power' button to turn on power for the Omni 50+ speaker. Now you can easily set up the product again for your home Wi-Fi network.
  • We recommend starting playback on the Omni+ speaker first, and then linking the 1st generation Omni speakers. Omni+ is more powerful and can provide more stability when restreaming to other speakers.
  • If your OMNI 50+ is completely drained, it will take 3,5 to 4 hours to fully charge. We advise to charge the Omni 50+ when it starts to blink red.
  • Make sure you disable AP/Client isolation on your Access Point / Extender and that Multicast forwarding is not disabled between the W-Fi networks. However, we cannot guarantee than streaming will work flawless as Extender networks are tricky and can cause many issues. Always use a 5GHz Wi-Fi network extender for best results.
  • If you are having problems playing music after setting up a new speaker (no matter what connection is used, Ethernet, Wi-Fi), please restart the Harman Kardon Controller app after the speaker setup is complete.
  • It is not possible to use the speaker while installing it to your WiFi network. Once you have successfully connected to the WiFi network, you can use Bluetooth and AUX again.
  • Make sure that both speakers are using the same network technology, either Ethernet or WiFi. Mixing them will increase music loading time.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Talk to a product expert
Call us now at: +61 291510376

Mon-Fri 8:00 AM to 5:00 PM (AEST)

E-mail us

E-mail us

365 days a year

We will respond within one business day.

Email us
Chat with us

Chat with us

Mon-Fri 8:00 AM to 5:00 PM (AEST)