Documents & Downloads
Product Specifications
- Amplifier Power (RMS)
- 40 W min./ch @ 8 ohms with <0.1% THD
- Power Bandwidth
- from 10Hz to 40kHz @ <0.1/THD into 8 ohms
- Frequency Response
- 4Hz – 130kHz (±0.5dB)
- Rise Time
- 1.5usec SQUARE WAVE – POWER AMP – <1.5usec
- Square Wave Tilt
- < 5%
- Total Harmonic Distortion
- < 0.1% from 250milliwatts to 40watts RMS
- Total Harmonic Distortion
- FM MONO – 0.3% (1kHz)
- Total Harmonic Distortion
- FM STEREO – 0.4% (1kHz)
- Transient Intermodulation Distortion (TIM)
- 40 watts SMPTE < 0.12% and 1 watt SMPTE < 0.15%
- Hum and Noise
- better than 60dB below rated output (unweighted) -40dB
- Damping Factor
- > 30 (1kHz @ 1watt)
- Input Sensitivity
- POWER AMP – < 1.2V
- Input Impedance
- POWER AMP – 33kilohms
- Signal-to-Noise Ratio
- POWER AMP – > 90dB @ 40 watts
- Output Impedance
- PREAMP – 600 ohms
- Phono Overload
- >95mV
- RIAA Equalization
- ±1.0dB
- Loudness Control
- +10dB @ 50Hz
- Filter
- HIGHCUT – -10dB @ 10kHz
- Filter
- LOWCUT – -6dB @ 50Hz
- Image Rejection
- -80dB -75dB
- Spurious Response Rejection
- -80dB
- IF Rejection
- -90dB -60dB
- Multiplex Separation
- 40dB (1kHz)
- Output Level
- 0.5V AM Signal for 1 watt < 150uV/M
- Selectivity
- AM – 35dB
- MSRP U.S.
- $419.95 each
- Sensitivity
- AM... > 250uV/m
- Sensitivity
- FM... IHF – 1.9uV
- Sensitivity
- FM... MONO – 3.5 @ -50dB
- Sensitivity
- FM... STEREO – 35uV @ -50dB
- Capture Ratio
- FM... 2dB
- AM Rejection
- FM... 60dB
- Alternate Channel Selectivity
- AM… 55dB
- Alternate Channel Selectivity
- FM… 80dB
Images & Videos
Can’t find what you’re looking for?
Chat with us
Mon-Fri 8:00 AM to 5:00 PM (AEST)