AVR 1710

AVR 1710

700-watt, 7.2-channel networked AVR with AirPlay and Bluetooth connectivity

Erste Schritte mit deinem AVR 1710

Erste Schritte mit deinem AVR 1710

Kurzanleitung

Starte im Handumdrehen mit unserer leicht verständlichen Kurzanleitung

Product Registration

Registriere dein Produkt.

Besitzt du dieses Produkt? Registriere es hier! Und nimm deine Garantie oder deinen Service einfach in Anspruch

Jetzt registrieren

Dokumente & Downloads

Produktdetails

Apple AirPlay
Bluetooth
Transient intermodulation distortion (TIM):
Unmeasurable
Power Consumption (full power/idle)
less than 0.5W (standby); 510W maximum
Stereo Power
100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, less than 0.07% THD
Multichannel Power (all channels driven)
100 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, less than 0.07% THD
Input Sensitivity/Impedence
250mV/27k ohms
Signal-to-noise Ratio (IHF-A) (dB)
100dB
Surround system adjacent-channel separation:
Dolby Pro Logic®/DPLII: 40dB; Dolby Digital: 55dB; DTS®: 55dB
Frequency Response
10Hz – 130kHz (+0dB/–3dB)
High Instantaneous Current Capability
±42 amps
Slew Rate
40V/sec
Frequency Range (MHz)
87.5MHz – 108.0MHz
Usable Sensitivity (IHF)
1.3µV/13.2dBf
Signal-to-Noise Ratio (Mono/Stereo dB)
70dB/68dB
Distortion (Mono/Stereo)
0.2%/0.3%
Stereo Separation @ 1kHz (dB)
40dB
Selectivity (±400kHz):
70dB
IF Rejection (dB)
80dB
Image Rejection (dB)
80dB
Frequency Range (kHz)
520kHz – 1710kHz
Signal-to-Noise Ratio (dB)
38dB
Usable Sensitivity (Loop)
500µV
Distortion (1kHz, 50% mod):
1.0%
Selectivity (±10kHz):
30dB
Input Level/Impedence (ohm)
1Vp-p/75 ohms
Output Level/Impedence (ohm)
1Vp-p/75 ohms
Width (in)
17-5/16
Width (mm)
440
Height (in)
4-3/4
Height (mm)
121
Depth (in)
11-13/16
Depth (mm)
300
Weight (lb)
11
Weight(kg)
5.1
Television Format
NTSC
Video Frequency Response (Composite/S-Video)
10Hz – 8MHz (–3dB)
Power Requirement
120V AC / 60Hz

700 watt audio/video receiver that boasts multiple wireless connectivity options, six HDMI inputs

Power, performance and more connectivity options than you’ll ever need: Introducing the Harman Kardon® networked AVR 1710, the answer to any entertainment enthusiast’s hunger for performance and versatility. It’s got muscle: up to 700 watts (100 watts per channel). Its 7.2-channel A/V receiver is equipped with HARMAN TrueStream Bluetooth® connectivity, Apple AirPlay, vTuner™ Internet radio and DLNA® 1.5 technology, giving you multiple options for streaming audio. And with six 3D-ready HDMI® inputs, including one equipped for MHL to connect mobile devices, and two HDMI outputs, you’ll have more than enough ways to connect to everything you love – movies, HDTV, sports, MHL-equipped devices and the Roku Streaming Stick™ dongle. While the AVR 1710’s connectivity alone makes it desirable, its sound really strikes a chord. It’s the first Harman Kardon AVR to feature our exclusive Natural Sound Processing (NSP), which creates a rich, enveloping surround-sound from any source – particularly with two-channel streaming content. And its EzSet/EQ™ III system automatically calibrates the AVR to your speakers and listening environment. The AVR 1710 is light, too, thanks to HARMAN GreenEdge™ certification – delivering all the power you need with low environmental impact. For those who want it all, the AVR 1710 can’t be matched.

The AVR 1710 high-performance audio/video receiver pumps out 100 watts per channel to power a full seven-channel surround-sound system. It can also connect to two powered subwoofers to provide enhanced low-frequency performance for all your entertainment. While the amplifier retains the time-tested, high-current-capacity (HCC), ultrawide-bandwidth Harman Kardon design to ensure the most accurate, dynamic sound with enhanced clarity and realism – even at the highest listening levels – a digitally based power supply gives the amplifiers all the muscle they need without the weight of traditional power-supply designs and their heavy transformers. The net result is a great-sounding AVR in a small form factor that’s friendly to the environment.
The AVR 1710 can stream audio from virtually any portable device. For Apple devices, such as computers and the iPad, iPhone and iPod touch, you can stream using the receiver’s built-in AirPlay technology. (AirPlay, vTuner and DLNA connections require a wired connection to a broadband network.) For other tablets, smartphones and laptops, you can take advantage of the AVR 1710’s integrated HARMAN TrueStream Bluetooth technology. A USB port is included on the front of the AVR so you can connect devices directly without an external adapter or a wireless connection. The AVR is also DLNA 1.5 compliant, which gives you multiple options for delivering content over your home network.
The HARMAN TrueStream guarantee ensures the best possible listening experience when you stream audio wirelessly via Bluetooth technology. HARMAN TrueStream tech selects the most current, most advanced wireless option to ensure the highest-quality sound, no matter what application or source device you use.
Six HDMI inputs with 3D and 30/36-bit Deep Color deliver high-definition digital video at resolutions up to 1080p with full-fidelity audio through a single cable. There is no loss of video or audio quality because of format conversion, just full-impact Hollywood excitement as its creators meant you to experience it. And with the AVR’s MHL (Mobile High-Definition Link), you can deliver high-definition audio/video content from your camera, phone, tablet or Roku Streaming Stick dongle directly to your HDTV via the AVR 1710’s MHL connection.
Is your listening room so large that you need two subwoofers to deliver the bass that you desire? That’s not a problem with the AVR 1710, thanks to dual subwoofer outputs that give your system a big-time boost in low-frequency clarity and realism when needed.
Control the audio in separate rooms with a single receiver. Thanks to the AVR 1710’s assignable amplifiers, you can power the audio in a second room without adding additional components. That means you can watch sports in one room while you play the soothing sounds of classical music in another.
The AVR 1710 gives you multiple options for audio playback with its front-panel USB port. Simply connect an iPhone, iPad, iPod or USB stick to play your stored tracks through your home entertainment system. The integrated USB port also charges your iOS devices.
The AVR 1710 takes the award-winning Harman Kardon look to a new level with a flush volume control and a more compact design aesthetic than earlier AVRs. Thanks to its light weight, made possible by an advanced digital power supply, the unit weighs less without sacrificing performance. It’s the perfect match for the thin glass shelves of today’s open TV/entertainment furniture.
The AVR 1710 delivers high-resolution audio that matches the digital-video quality of Blu-ray Disc™ formats, unlocking the full potential of movie soundtracks formatted with Dolby® TrueHD and DTS-HD Master Audio™ coding. No matter what mode or mood you are in, you’ll always hear audio playback at its finest.
The new HARMAN EzSet/EQ III auto-calibration process precisely adjusts the AVR 1710’s volume levels, speaker-distance/delay-time settings and equalization to optimize audio performance automatically for your specific speaker system and room conditions. The system features an easy-to-follow menu display and includes a plug-in calibration microphone.
The HARMAN GreenEdge logo assures you that the AVR 1710’s design is environmentally friendly but won’t compromise the premium performance for which HARMAN products are known. Thanks to an advanced power supply, the AVR 1710 can deliver high-quality audio in a small, light chassis that uses less metal and plastic. The smaller design means minimal environmental waste and a small carbon footprint.
The AVR 1710 features vTuner connectivity to bring you a whole world of online audio entertainment. As soon as it’s out of the box, you can stream over-the-air radio stations from around the globe as well as a wide range of Internet-only radio stations.
All connections on the AVR 1710 are color-coded to simplify hookup and reduce errors. The color-coded binding-post speaker terminals on all output channels accept banana plugs, pin connectors or bare wire to provide secure links for your speaker cables.
The AVR 1710 simplifies your life with a programmable infrared (IR) remote control. Its ergonomic design works seamlessly with the receiver’s multilingual on-screen display, guiding you through system setup and operation with consummate ease. The multidevice remote can also control your TV, cable boxes, satellite tuners and other playback sources. For further installation flexibility, there is a 12-volt trigger output and a remote IR sensor input.
Taking control to the next level, the Harman Kardon Remote app is available from the iTunes App Store for iOS® devices and the Google Play™ service for Android™ products. It will let you use your compatible smartphone or tablet to drive the AVR 1710 without picking up the remote.

FAQs & How-To

20 Ergebnisse
< 1 2 >

Sie können nicht finden, wonach Sie suchen?

Rufen Sie uns an

Rufen Sie uns an

Rufen Sie uns jetzt unter folgender Nummer an: +43 800 070 667

Montag - Freitag: 10:00-17:00
Samstag - Sonntag: 10:00-16:00

Schreiben Sie uns eine Email

Schreiben Sie uns eine Email

Wir sind Montag-Sonntag für Sie da, um Ihre E-Mail schnellstmöglich zu beantworten.

Schreiben Sie uns eine Email
Chatten Sie mit uns

Chatten Sie mit uns

Montag - Freitag: 10:00-17:00
Samstag - Sonntag: 10:00-16:00

message

WhatsApp uns

Senden Sie uns eine Nachricht hier 

Montag - Freitag: 10.00-17.00
Samstag - Sonntag: 10:00-16:00