Support Überblick / Home Audio / Receiver / Receiver - Stereo / HK 3485

HK 3485

Stereo Receiver (120 watts x 2)

Verkauft von 2007 bis 2007

Vorgänger-Produkt:	HK 3480
Nachfolgeprodukt:	HK 3490
Hergestellt in:	China

Dokumente & Downloads

Benutzerhandbücher

Bedienungsanleitung (Englisch) 3.09 MB

Anderes

Packaging and Accessories (Englisch) 502.43 KB

Produktdetails

Allgemeine Spezifikationen

Power Requirements: AC 120V/60Hz

Power Consumption: 3W standby, 280W maximum (both channels driven)

Digital Inputs (coaxial/optical): None

Analog Inputs: 1 A/V on front panel

Analog Inputs: 3 A/V on rear panel

Analog Inputs: 3 audio-only

Analog Inputs: tuner

On-Screen Display: No

Multizone Capability: Speaker A/B switch

Remote Control: Five-device system remote

Shipping Weight (System, Accessories, Packing): 25.1 lb (11.4kg)

MSRP U.S.: $449.95 each

Audio Spezifikationen

# of Amplifier Channels: 2

Stereo Mode:

Continuous Average Power (FTC) per Channel: 120 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms

Continuous Average Power (FTC) per Channel: 150 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms

Input Level/Impedance: 200mV/47k ohms - Linear (High-Level)

Signal-to-Noise Ratio: 95dB (IHF-A)

Frequency Response: 10Hz – 110kHz (+0/-3dB @ 1 watt)

Transient Intermodulation Distortion (TIM): Unmeasurable

Rise Time: 16 µsec

Slew Rate: 40V/µsec

Abmessungen

Width: 17.4 inches (442mm)

Height: 6.6 inches (168mm)

Depth: 15 inches (382mm)

Weight: 20.9 lb (9.5kg)

Dimensions:

Carton Dimensions: 21.5 inches x 9.9 inches x 17.9 inches (545mm x 251mm x 455mm)

Videospezifikationen

Television Format: NTSC/PAL/SECAM

Signal Format System: Composite

Input Level/Impedance: 1V p-p/75 ohms, unbalanced

Sync Polarity: Negative

Output Level/Impedance: 1V/75 ohms

Video Frequency Response: 10Hz – 10MHz

Tuner Specifications

Frequency Range: AM... 520 – 1720kHz

Frequency Range: FM... 87.5 – 108MHz

Signal-to-Noise Ratio: AM... >40dB

Usable Sensitivity: FM... IHF 1.12µV/13.5dBf

Signal-to-Noise Ratio: FM... Mono/Stereo 73/72dB

Usable Sensitivity: AM... Loop 500µV/M

Distortion: AM... 1kHz, 50% Mod 0.8%

Distortion: FM... Mono/Stereo 0.3/0.4%

Selectivity: AM... ± 10kHz, >25dB

Stereo Separation: FM... 40dB @ 1kHz

Selectivity: FM... ± 400kHz, 65dB

Image Rejection: FM... >80dB

IF Rejection: FM... >100dB

Tuner Output Level: FM... 1kHz, ±100kHz, Dev 500mV

Amplifier Specifications

Amplifier Power (RMS): 120 x 2 @ 8 ohms, (20Hz – 20kHz, <0.07% THD) (all channels driven at full power)

High Instantaneous Current Capability (HCC): ± 45 Amps

Harman Kardon knows more about stereo receivers than anyone else. After all, we invented the product category almost fifty years ago! The HK 3485 is where traditional features such as a high-performance phono preamp, pre-out/main-in jacks and high-current amplification meet the present and future with video switching, a subwoofer output and a cable for direct audio/video connection to an iPod player or MP3 player. Whether it comes from a turntable, the built-in tuner or a portable player, your music never sounded better!