AVR 7000

AVR 7000

Audio/Video Receiver With Dolby Digital & DTS (110 watts x 2 | 100 watts x 5)

Vendido desde 1999 hasta 2001

Producto predecesor: AVR 85
Producto sucesor: AVR 8000
Made in: China

Documentos y descargas

Especificaciones del producto

Power Requirements
AC 120V/60Hz
Power Consumption
125W idle, 1100W maximum (2 channels driven)
MSRP U.S.
$1799.95 each
Continuous Average Power (FTC) per Channel (stereo mode)
110 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Amplifier Power (RMS)
Center channel... 100 Watts @ < 0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
Amplifier Power (RMS)
Front L&R channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
Amplifier Power (RMS)
Surround channels... 100 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms (All Channels Operating at Full Power)
High Instantaneous Current Capability (HCC)
± 75 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
95dB (IHF-A)
Surround System Adjacent Channel Separation
Analog Decoding(Pro Logic, etc.)... 40dB Dolby Digital (AC-3)... 55dB DTS Mode... 55db
Frequency Response
10Hz – 100kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
unmeasureable
Rise Time
16µsec
Slew Rate
40V/µsec
Surround Modes
Dolby Digital and DTS surround, Harman Kardon's VMAx virtual surround sound
Digital Inputs
4
Digital Outputs
2
Width
17-5/16 inch (440mm)
Height
7-5/8 inch (193mm)
Depth
20-7/16 inch (519mm)
Weight
49 lb (22.3kg)
Video Formats
NTSC
Input Level/Impedance
1Vp-p/ 75ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
5Hz–10MHz (-3db)
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
FM... 70dB (mono)
Signal-to-Noise Ratio
FM... 68dB (stereo)
Distortion (Mono/Stereo)
FM... 0.2%/0.3%
Stereo Separation
FM... 40dB @ 1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 80dB
IF Rejection
FM... 90dB
Tuner Output Level
FM... 1kHz, ±75kHzDev 500mV
Frequency Range
AM... 520 – 1710kHz
Signal-to-Noise Ratio
AM... 45dB (IHF-A)
Usable Sensitivity
AM... Loop 500µV
Distortion
AM... 1kHz, 50% Mod 0.8%
Selectivity
AM... ± 10kHz, 30dB

High-current(+/-75 Amps), ultrawide-bandwidth(10Hz - 115kHz)amplifier effortlessly powers the most dynamic digital sources. Dual, matched discrete output devices for each channel. Massive torroidal power transformer. Dolby Digital and DTS surround-sound processing using advanced Crystal DSP engine. Factory remanufactured.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 0800-333-0212

De Lunes a Viernes:
09:00 a.m a 6:00 p.m
Sábados:
09:00 a.m a 12:00 p.m

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico