AVR 700
Audio/Video Receiver With Dolby TrueHD & DTS-HD Master Audio & HDMI 1.4 (75 watts x 5) 5.1
Vendido desde 2012 hasta ahora
| Producto predecesor: | AVR 1565 |
|---|---|
| Made in: | China |
Documentos y descargas
Especificaciones del producto
- Power Consumption (full power/idle)
- less than 0.5W (standby); 280W maximum
- Multichannel Power (all channels driven)
- 75W per channel, two channels driven @ 6 ohms, 20Hz – 20kHz, less than 0.1% THD; 100W per channel, two channels driven @ 6 ohms, 1kHz, less than 1% THD
- Continuous Average Power (FTC) per Channel (surround modes)
- 75W per channel, two channels driven @ 6 ohms, 20Hz – 20kHz <0.01% THD
- Continuous Average Power (FTC) per Channel (surround modes)
- 100W per channel driven @ 6 ohms, 1kHz, <1% THD
- Input Level/Impedance
- 200mV/47k ohms
- Signal-to-Noise Ratio
- 95dB (IHF-A)
- Surround System Adjacent Channel Separation
- Dolby Pro Logix/PLII... 40dB
- Surround System Adjacent Channel Separation
- Dolby Digital... 55dB
- Surround System Adjacent Channel Separation
- DTS... 55dB
- Frequency Response
- 10Hz – 100kHz
- High Instantaneous Current Capability (HCC)
- ± 25 Amps
- Power Requirements
- 120V AC/60Hz
- Power Consumption
- 280W Maximum; <0.5W Standby
- Usable Sensitivity (IHF)
- 1.3?V/13.2dBf
- Frequency Range (MHz)
- 87.5 – 108.0MHz
- Usable Sensitivity (Loop)
- 500?V
- Output Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Surround system adjacent-channel separation:
- Dolby Pro Logic/PLII: 40dB Dolby Digital
- Input Level/Impedence (ohm)
- 1Vp-p/75 ohms
- Signal-to-Noise Ratio (Mono/Stereo dB)
- 65dB/62dB
- Input Sensitivity/Impedence
- 200mV/47k ohms
- Signal-to-Noise Ratio (dB)
- 45dB
- Stereo Separation @ 1kHz (dB)
- 35dB @ 1kHz
- Selectivity (±10kHz):
- 30dB
- Distortion (Mono/Stereo)
- 0.2%/0.3%
- High Instantaneous Current Capability
- ±25 amps
- Signal-to-noise Ratio (IHF-A) (dB)
- 95dB
- Frequency Range (kHz)
- 520 – 1720kHz
- Width (mm)
- 440
- Depth (in)
- 13
- Weight(kg)
- 9.1
- Width (in)
- 17-5/16
- Height (in)
- 5-1/2
- Height (mm)
- 125
- Depth (mm)
- 330
- Weight
- 20 lb (9.1kg)
- Television Format
- NTSC
- Video Frequency Response (Component Video)
- 10Hz – 8MHz (–3dB)
- IF Rejection (dB)
- 80dB
- Image Rejection (dB)
- 80dB
- Input Level/Impedance
- 1Vp-p/75 ohms
- Output Level/Impedance
- 1V/75 ohms
- Video Frequency Response
- 10Hz – 8MHz (-3dB) composite video only
- HDMI
- witn 3D and 12-bit Deep Color
- Frequency Range
- FM... 87.5 – 108.0MHz
- Usable Sensitivity
- FM... 1.3V/13.2dBf
- Signal-to-Noise Ratio
- FM... 65dB/62dB (Mono/Stereo)
- Distortion (Mono/Stereo)
- FM... 0.2%/0.3%
- Stereo Separation
- FM... 35dB @1kHz
- Image Rejection
- FM... 80dB
- IF Rejection
- FM... 80dB
- Frequency Range
- AM... 520kHz – 1720kHz
- Signal-to-Noise Ratio
- AM... 45dB
- Usable Sensitivity
- AM... 500V in loop
- Selectivity
- AM... 30dB @(10kHz)
- Power Requirement
- 120V AC/60Hz
Awaken your inner cinephile.
A premium home theater experience is within your reach. The Harman Kardon® AVR 700 delivers a fully immersive, 5.1-channel, surround-sound experience while playing high-definition sources at maximum quality. HDMI® technology with 3D and Audio Return Channel connections allows you to watch your favorite films as if you were in a movie theater. Dolby® TrueHD and DTS-HD Master Audio™ decoding technology deliver the most realistic sound possible, no matter what your home theater setup is like. Enjoy movies at home as never before. Experience the Harman Kardon AVR 700.
The Harman Kardon AVR 700 delivers solid, detailed sound at 75 watts per channel. Optimized to fill an average-sized home theater with anything but average audio, the AVR 700 ensures that your music will always hit the right notes, sound effects will always feel realistic, and dialogue will always be delivered crisply.
3D movies play as vividly and realistically in your home as they would in a movie theater, thanks to the HDMI connectivity on the AVR 700. Experience everything from a 3D TV to a 3D Blu-ray Disc™ recording with an astonishing level of realism. An Audio Return Channel simplifies setup by feeding audio back from a “smart TV” through the AVR.
The AVR 700 can power a full 5.1-channel surround-sound system. The engineers who created the AVR have included a high-current capability (HCC), ultrawide-bandwidth amplifier for accurate, dynamic audio, giving your home system a spectacular range of sound.
Hear films in the way that filmmakers intend them you to hear them. The AVR 700’s Dolby TrueHD and DTS-HD Master Audio decoding create an immersive, high-resolution sound environment that matches the high-resolution HDMI video from HD sources such as Blu-ray Disc media.
The AVR 700 features three HDMI inputs for all of your modern digital video sources. It also has two composite video inputs for legacy sources. Three digital audio inputs and five analog inputs keep you connected to all your audio sources, while a front-panel USB port allows you to play MP3 and WMA files.
While some people sleep, you stay up to watch. But how do you enjoy the full experience of the AVR 700 without waking anyone up? Simple. Use night mode, which reduces the volume on loud sounds and increases the volume on quiet sounds. Now you can enjoy a full experience at quiet listening levels without having to adjust the volume all the time.
The AVR 700 comes with a fully functional IR (infrared) remote control that can make other remotes unnecessary. Optimized to run most of the devices in your home theater system, this remote eliminates the need for a table full of remotes. Instead, it enables you to return your coffee table to its intended purpose: a footrest.
An easy-to-read dot-matrix display on the front panel of the AVR 700 allows you to listen to music on your system without making you turn on the TV to control its functionality.
Preguntas frecuentes y procedimientos
1 resultados
-
Existen cinco razones posibles por las cuales el receptor podría apagarse. 1. Hay un problema interno con el receptor. 2. Hay un problema con uno o más de sus altavoces. 3. Hay un problema con uno o más de los cables de los altavoces. 4. Hay un problema con el cableado del altavoz que se le realizó a su sistema. 5. La unidad se sobrecalentó. Sin ventilación. Primero, compruebe el cableado en cada terminal de altavoz en la parte posterior de su receptor y en la parte posterior de los altavoces. Un solo filamento de cable de altavoz que cruce de una terminal a otra es suficiente para hacer que el amplificador se apague o entre en modo PROTECT. Si no encuentra ningún problema con ninguno de los cables, desconecte todos los altavoces del receptor. Si el receptor continúa en PROTECT, el problema está en el receptor. Envíe un caso en la página Contact Us (contáctenos). Ellos lo ayudarán. Sin embargo, si el receptor se enciende, el problema es otro. Comience por reconectar un altavoz a la vez. Eventualmente conectará un altavoz que hará que el receptor se apague. En este punto debería encontrar la causa del problema. Por otro lado, puede que solo se sobrecalentara. Debe dejar al menos 2 a 3 pulgadas de espacio entre la parte superior de la unidad y cualquier estante o componente por encima de la unidad. La unidad no debe estar dentro de un compartimiento cerrado cuando se utiliza. La unidad tiene que poder respirar. Hay amplificadores muy potentes en estos receptores. Si se sobrecalientan, se apagarán. Un ventilador externo puede ser de gran ayuda.¿Te ha resultado útil? ¡Gracias por tus comentarios!
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
0800-333-0212
De Lunes a Viernes:
09:00 a.m a 6:00 p.m
Sábados:
09:00 a.m a 12:00 p.m
