KP 1
In-Wall Keypad For PA4000 Amplifier
Documentos y descargas
Especificaciones del producto
- Mounting System
- Compatible with most standard electrical junction boxes or use with a plaster ring. Designed for use with user-supplied, Decora-style cover-plate.
- Connections
- 8P8C RJ-45 Jack; 3-Pin Eurostyle Terminal Block
- Wiring Protocols
- RJ-45 modular jack 8P8C per TIA wiring specifications for T568B straight-through wiring using CM- or CP-rated Category 3 or 5 UTP, 8-pin, 8-conductor wiring, minimum 24AWG. For runs over 250 feet, thicker CL2/CL3, 4 pair, 22AWG wire may be required to preserve signal integrity. See owner's manual for further details.
- Wiring Protocols
- 3-pin output from optional IR sensor with conductors for Signal, Ground and +12 Volts
- Recommended Third-Party Optional Infrared Sensor
- Xantech Micro Link Model 490-00
- MSRP U.S.
- $49.95 each
- Weight
- 0.25 lb (0.11kg)
- Dimensions (H x W x D)
- 4 inch x 1-5/8 inch x 1-9/16 inch (103mm x 41.2mm x 40.1mm)
- Cutout Dimensions
- 1/2 inch (12.7mm) Cutout for Third-Party Optional IR Sensor
Let the KP 1 power up the PA 4000 multichannel amplifier and control speaker volume in any room in your home. Use with a Decora-style faceplate (not included) to blend with any room the KP 1 mounts in standard electrical junction boxes. When used with optional third-party IR sensors, you can also control functions of Harman Kardon DVD and CD players as well as A/V receivers.
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
0800-333-0212
De Lunes a Viernes:
09:00 a.m a 6:00 p.m
Sábados:
09:00 a.m a 12:00 p.m
