AVAP 5G

AVAP 5G

AVR5 Receiver & AVS10 Speaker System - 6PC

Vendido desde 1999 hasta 2000

Documentos y descargas

Especificaciones del producto

Power Requirements
120V AC/60Hz
Power Consumption
Receiver… 72W idle, 332W maximum (2 channels driven)
MSRP U.S.
$699.95 per system
Dimensions
Receiver… Width 17-2/5 inch (442mm)
Dimensions
Receiver… Height 6-1/8 inch (156mm)Height measurement includes feet and chassis.
Dimensions
Receiver… Depth 16-5/16 inch (415mm) Depth measurement includes knobs, buttons and terminal connections.
Dimensions (H x W x D)
SATELLITES… 7 x x 4 3/4 x 3 3/4
Dimensions (H x W x D)
CENTER… 4 3/4 x 10 1/2 x 3 3/4
Dimensions (H x W x D)
SUB… 11 1/2 x 11 1/2 x 11 1/2
Weight
Receiver… 24.6lbs (11.2kg)
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance
1V/75 ohms
Video Frequency Response
10Hz to 8MHz (-3dB)
Frequency Range
AM... 520 – 1710kHz
Frequency Range
FM... 87.5 – 108MHz
Signal-to-Noise Ratio
AM... 43dB
Usable Sensitivity
FM... IHF 1.3?V/13.2dBf
Signal-to-Noise Ratio
FM... 70dB Mono ( measured at amV RF Input Level)
Usable Sensitivity
AM... Loop 500µV/M
Distortion
AM... 1kHz, 50% Mod. 0.8%
Signal-to-Noise Ratio
FM... 68dB Stereo ( measured at amV RF Input Level)
Distortion (Mono/Stereo)
FM... 0.3%/0.5%
Selectivity
AM... ± 10kHz, 30dB
Stereo Separation
FM... 40dB @1kHz
Selectivity
FM... ± 400kHz, 65dB
Image Rejection
FM... 40dB
IF Rejection
FM... 110dB
Tuner Output Level
FM... 1kHz, ±75kHz Dev 500mV
Frequency Response
45Hz – 150kHz
Crossover Frequency(ies)
continuously variable 50Hz – 150Hz
Input Impedance
200k ohms (high level)
Input Impedance
10 ohms (low level)
Recommended Amplifier Power (RMS)
50 Watts
Subwoofer Transducer
specially designed 8 inch polycone
Frequency Response
200Hz – 20kHz
Crossover Frequency(ies)
5kHz
Nominal Impedance
compatible with 8 ohms
Low-Frequency Transducer (Woofer)
3-1/2 inch shielded
High-Frequency Transducer (Tweeter)
.5 inch (13mm) polycarbonate tweeter with acoustic lens
Frequency Response
150Hz – 20kHz
Crossover Frequency(ies)
5kHz
Nominal Impedance
compatible with 8 ohms
Low-Frequency Transducer (Woofer)
3-1/2 inch shielded
Continuous Average Power (FTC) per Channel (stereo mode)
45 Watts per channel, 20Hz – 20kHz @ <0.08% THD, both channels driven into 8 ohms
Amplifier Power (RMS)
SURROUND MODES... Front L&R channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms
Amplifier Power (RMS)
SURROUND MODES... Surround channels... 35 Watts per channel, 20Hz – 20kHz @ <0.08% THD into 8 ohms
Amplifier Power (RMS)
SURROUND MODES… Center channel... 35 Watts @ <0.08% THD, 20Hz – 20kHz into 8 ohms
High Instantaneous Current Capability (HCC)
± 35 Amps
Input Level/Impedance
200mV/47k ohms - Linear (High-Level)
Signal-to-Noise Ratio
92dB (IHF-A)
Pro Logic Decoding
40dB
Frequency Response
8Hz – 120kHz (+0/-3dB @ 1 watt)
Transient Intermodulation Distortion (TIM)
Not Measurable
Rise Time
16µsec
Slew Rate
40V/µsec

We've matched one of our most popular Dolby Pro Logic receivers, AVR5, with 5 AVS10 speakers (1/2 inch tweeter, 3-1/2 inch woofer) and included an 8 inch 50-watt Powered Sub for a system that will turn viewing an ordinary TV into a Home Cinema experience that will truly astound you. Receiver Reconditioned.

¿No encuentras lo que buscas?

Llámanos

Llámanos

Habla con un experto sobre nuestros productos
Llámanos a este número: 0800-333-0212

De Lunes a Viernes:
09:00 a.m a 6:00 p.m
Sábados:
09:00 a.m a 12:00 p.m

Envíanos un correo electrónico

Envíanos un correo electrónico

los 365 días del año.

Envíanos un correo electrónico